Advertisement
The Side Load Kayak Mount is an optional accessory for the use of carrying kayaks on the LittleGiant Trailer.
Note: Kayak and webbing straps not included.
Parts List
Description
Uprights
Cradle
Wire lock Pins
Support Bracket
Support Feet
Tools Needed
21/64 Drill Bit
13 mm Wrench
Qty
2
2
6
2
2
Drill
Small Drill bit
13 mm Socket
Center Punch (optional)
Side Load Rack
Part No. TLK505
User Assembly Manual
Cradle
Support
Bracket
Uprights
Support Feet
Wire lock Pins
Wire lock Pins
Advertisement
Table of Contents
Summary of Contents for Let's Go Aero Side Load Rack
- Page 1 Side Load Rack Part No. TLK505 User Assembly Manual The Side Load Kayak Mount is an optional accessory for the use of carrying kayaks on the LittleGiant Trailer. Note: Kayak and webbing straps not included. Cradle Parts List Description Wire lock Pins...
- Page 2 Step 1: Install Support Feet on the Trailer The Side Load Rack attaches to U-tubes #2 and #7. Using a drill with a 1/2” Socket and a 1/2” Wrench remove the nuts from the floor of the #2 and #7 U Tube. Place the Support Foot under the trailer and align with trailer frame.
- Page 3 Side Load Rack Assembly Step 4: Attach the Uprights and Cradle to the Support Bracket Place the Upright in the Support Bracket. Place the Cradle over the Uprights in the Support Bracket as shown in the picture. Align the holes and secure the Upright and the Cradle using two Wire Lock Pins as shown in the picture.
Need help?
Do you have a question about the Side Load Rack and is the answer not in the manual?
Questions and answers