1. Manuals
  2. Brands
  3. Antenna Manuals
  4. Security System
  5. Carephone
  6. Technical manual

Antenna Carephone Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Manual
Carephone AP2000
ANTENNA CAREPHONE
AP2000
Th2000En
2000-09-12 / V3.09
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Carephone and is the answer not in the manual?

Questions and answers

Summary of Contents for Antenna Carephone

  • Page 1 Technical Manual Carephone AP2000 ANTENNA CAREPHONE AP2000 Th2000En 2000-09-12 / V3.09...

  • Page 2: Table Of Contents

    Installation ..............................16 General..............................16 Programming ............................18 Remote programming..........................31 Programming manuscript ........................32 Service................................34 PROM................................34 Battery...............................34 Alarm reception with a telephone......................36 Specifications...............................37 Options .................................38 The contents of this document can be altered without further notice. © Copyright Antenna AB, 1996 Th2000En 2000-09-12 / V3.09...
  • Page 3 Technical Manual Carephone AP2000 All rights reserved Th2000En 2000-09-12 / V3.09...

  • Page 4: Product Overview

    The Antenna Carephone is easy to install. Connect it to the public telephone network with a telephone plug; to an electrical outlet using an adapter. In case of electrical power-failure, the storage battery functions as a backup.

  • Page 5: Function

    Technical Manual Carephone AP2000 Function Alarm sequence The Central Unit can store up to six different alarm receivers with programmable telephone numbers and alarm codes. When an alarm is activated, from radio or input, the Central Unit start the dialling sequence.
  • Page 6 In normal mode the Central Unit automatically selects the correct receiver type / protocol, multi- protocol. The multi-protocol includes Antenna, L400, Telephone, Tunstall, ANT and Digifon. (L400 only in Sweden, Norway, Finland and Denmark, and Digifon only in Germany). If a special protocol is desired the receiver type must be programmed for the receiver.

  • Page 7: Alarm Types

    Technical Manual Carephone AP2000 Alarm types Type tt Alarm cause Synthetic speech Voice con Silent Output Boundary alarm Boundary alarm Intruder alarm Intruder alarm Smoke alarm Smoke alarm Assistance alarm Assistance alarm Reset message Reset Panic alarm Panic alarm X, listen...
  • Page 8 Technical Manual Carephone AP2000 (60miutes after an alarm) Panic alarm Panic alarm Intruder-/Passive alarm Alarm off Alarm off (Boundary & Intruder) Passive alarm on Passive alarm on Boundary alarm on Boundary alarm on Passive alarm off Passive alarm off Intruder alarm on...
  • Page 9 Technical Manual Carephone AP2000 Translation of alarm types: Antenna L400 Ericsson Slow- Tunstall Digifon Franklin (Byte 2-4-5) (Byte 1-4-5-6-7) 0A-08-08 01-04-00-00-00 0A-08-08 01-08-00-00-00 0A-08-04 01-01-00-00-00 10 (C) 0A-09-00 02-81-00-00-00 10 (R) 0A-08-01 02-90-00-00-00 10+16 (R+B) 0A-28-01 02-90-00-0C-00 0A-0C-00 02-00-40-00-00 13 (C)

  • Page 10: Status Indicator

    Technical Manual Carephone AP2000 45 (C) 0A-09-00 02-84-00-00-00 45 (R) 0A-08-01 46 (C) 0A-09-00 02-81-00-00-00 46 (R) 0A-08-01 02-90-00-00-00 47 (C) 0A-09-00 02-82-00-00-00 47 (R) 0A-08-01 70 (C) 0A-09-00 02-01-00-00-00 70 (R) 0A-08-01 02-10-00-00-00 0A-08-00 02-00-08-00-00 0A-0A-00 02-00-0C-00-00 0A-0A-00 02-00-0C-00-00...

  • Page 11: Power Failure

    Technical Manual Carephone AP2000 Power failure In the event of an electrical power failure, the storage battery provides backup for the Central Unit by switching to the battery mode. If this happens, the current supply is minimised to the essential functions for initiating alarms.

  • Page 12: Test Alarm

    (randomised). Forwarding When the Central Unit dials an alarm receiver using the Antenna protocol, a forwarding command can be sent from the alarm receiver to the Central Unit. This command consists of a telephone number to an alternative alarm receiver. The next dialling attempt is forwarded to the new number.

  • Page 13: Alarm-Repeat And Alarm-Block

    Technical Manual Carephone AP2000 Alarm-repeat and Alarm-block The function ”alarm-repeat” (reminder-alarm) is activated from the alarm receiver and it means that if an alarm has not been acknowledged with the STOP-key on the Central Unit within a pre-set time, then the alarm is repeated. Also the function ”alarm-block” is activated from the alarm receiver and it means that active alarm type is blocked for a pre-set time.

  • Page 14: Inputs And Outputs

    Technical Manual Carephone AP2000 Inputs and outputs The Central Unit has two alarm inputs and a possibility to select between one additional input and an output with a switch on the circuit board (default setting is output). Input-1 is general, input-2 is eligible and input-3 is in parallel with the ALARM-key.

  • Page 15: Radio

    Signals enter the radio receiver via a flexible antenna on the Central Unit's backside. For optimal range, the antenna must be fully extended (if possible, in a suspended position).

  • Page 16: Installation

    3. Connect the adapter, C, to the standard electrical outlet and to the Central Unit (POWER), 3. 4. Turn the Central Unit to ON, 2. Notice - if the Central Unit is turned on and the adapter is removed, the storage battery will discharge. Make certain that the antenna, 1, is extended. Th2000En...
  • Page 17 Technical Manual Carephone AP2000 5. Test the Central Unit by pressing the INF-key. In a normal operational mode, the Central Unit leaves the message -- function normal. 6. Switch on the keyboard, if it is turned off. 7. Erase previously programmed data (default settings).

  • Page 18: Programming

    Technical Manual Carephone AP2000 Programming Program the Central Unit using the build-in keyboard (or by remote programming on some models). The keyboard is covered with a keyboard-cover. Follow the instructions given by the synthetic speech function. Always terminate a programming sequence with the END-key. After an accepted sequence, the Central Unit says - programming done.
  • Page 19 Technical Manual Carephone AP2000 Th2000En 2000-09-12 / V3.09...
  • Page 20 Technical Manual Carephone AP2000 Th2000En 2000-09-12 / V3.09...
  • Page 21 Technical Manual Carephone AP2000 Th2000En 2000-09-12 / V3.09...
  • Page 22 Technical Manual Carephone AP2000 Th2000En 2000-09-12 / V3.09...
  • Page 23 Technical Manual Carephone AP2000 • Reset memory - default settings [#] [#] [#] [END] Before entering any information, erase previous data so that the Central Unit returns to its default settings. The erase data sequence removes all information logged for alarm receivers and radio alarm units.
  • Page 24 Technical Manual Carephone AP2000 • Install alarm receiver [TEL] [1-6] "phone no." [TEL] "alarm code" ( [TEL] [n] [n] ) [END] The Central Unit handles up to six different alarm receivers. Enter the telephone number and alarm code for each alarm receiver. Telephone numbers can be up to 16 characters long; alarm codes up to 10 characters.
  • Page 25 Technical Manual Carephone AP2000 09 Digifon (only in Germany) Th2000En 2000-09-12 / V3.09...
  • Page 26 Technical Manual Carephone AP2000 • Erase alarm receiver erase the programming of one alarm receiver, 1-6 [TEL] [1-6] [#] [END] erase the programming of all alarm receivers [TEL] [#] [END] • Information about alarm receivers information about one alarm receiver, 1-6...
  • Page 27 Technical Manual Carephone AP2000 alarm code: 69600 item-number: code to alarm receiver: 696003 The radio alarm unit can also be programmed to send an alarm to a specific individual receiver [1-6]. If a radio unit is linked to a specific receiver, its alarm will be sent to that receiver only. Notice - enter the selected receiver's number ([1-6]) after the radio code has been received by the Central Unit.
  • Page 28 Technical Manual Carephone AP2000 • Special functions [*] [n] [n] [ON/OFF] [END] [*] [n] [n] [d] ( [d] ( [d] ) ) [END] [*] [n] [n] [INF] The special functions are divided into two groups, one for functions that only can have the value on and off, and one for functions with numerical values.
  • Page 29 Line multiplexer Selects that the connection of the telephone line is done through Antenna Line Multiplexer. Active function means that incrementing the alarm attempts and changing of alarm receiver is only done when the dial tone is approved.
  • Page 30 Technical Manual Carephone AP2000 output activation, 0-150 in step of 10. Output activation time [minutes] Selects the activation time of the output after an alarm that activate the output, 0-10. The value 0 switch off the alarm activation of the output.

  • Page 31: Remote Programming

    When the programmer notice that the Carephone is on-line (looking after dial tone, approx. 10s) shall the [*]-key be pressed immediately and the Carephone enters remote programming. (Notice - telephone no. 1 must be programmed if this shall work).

  • Page 32: Programming Manuscript

    Technical Manual Carephone AP2000 Programming manuscript • Alarm receivers: [TEL] [1-6] "phone no" [TEL] "alarm code" ( [TEL] [n] [n] ) [END] Telephone number Alarm code (Receiver type) • Radio alarm units: [P] [P] ( [ON2]/OFF ) ( [*] ) ( [0-9] ) "radio code" ( [1-6] ) [END] [P] [t] [t] ( [ON2/OFF] ) ( [*] ) ( [0-9] ) "radio code"...
  • Page 33 Technical Manual Carephone AP2000 • Special functions: [*] [n] [n] [ON2/OFF] [END] [*] [n] [n] ( [d] ( [d] ) ) [d] [END] Special functions Default setting Setting Pre-alarm Answer-function Filter time, ALARM-key Battery alarm Central Unit Pulse (dialling) Status-message...

  • Page 34: Service

    Technical Manual Carephone AP2000 Service PROM Always erase memory, default settings, before and after the PROM is changed. Notice - make certain the PROM are aligned correctly (A). Battery A storage battery back-up operation during an electrical power failure. When the battery voltage drops below the alarm limit a battery alarm is initiated (can be disabled with a special function 03).
  • Page 35 Technical Manual Carephone AP2000 Th2000En 2000-09-12 / V3.09...

  • Page 36: Alarm Reception With A Telephone

    Central Unit sends an alarm message to identify the alarm and report the cause of the alarm. Below is a guide of how to handle an alarm from Antenna Carephone by a telephone: 1. When you lift the receiver, you can hear the Central Unit repeat the alarm type and send a tone - for instance, assistance-alarm "beep".

  • Page 37: Specifications

    : 45x35x12mm (lxwxh) ° Temperature range : 0-40 Hereby, Antenna AB declares that this Carephone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC Original can be found at: www.antennacare.com/infobank.htm Not implemented in all models Not in Sweden, Norway, Finland and Denmark.

  • Page 38: Options

    Smoke detector, radio x-1090SD IR sensor, radio (PIR) x-EX/35R Remote control x-1125RC Radio alarm box x-1127LB Antenna Carephone AP2000, Central Unit xx-2000D0 Radio Alarm Button xx-1091C0 Bracelet for Radio Alarm Button 200-1091WB Pins for bracelet 200-1091CR Necklace for Radio Alarm Button...

This manual is also suitable for:

Ap2000

Table of Contents