LG AJ-LT91 Owner's Manual page 3

4. After lifting the lamp cover off, remove the two retaining screws on the lamp
case with a screwdriver similar objects.
5. Lift up the fixed wire handle of the lamp.
6. Pull out the handle slowly and remove the lamp case.
7. Insert the new lamp gently into the correct position. Make sure it is inserted
correctly.
8. Tighten the screws you removed in step 4.
9 Replace the lamp cover and tighten the cover screws.
(Make sure the lamp cover is securely fastened. If the lamp cover is open,
the lamp indicator flashes green and the projector is not turned on.)
<Bottom of projector>
Handle