Page 1
FLOOR & TABLE LAMP ASSEMBLY INSTRUCTIONS SEE REVERSE FOR CHARGING INSTRUCTIONS IF ADDED WEIGHT IS DESIRED FILL WITH SAND WITH FUNNEL THROUGH HOLE ON T OP OF BASE BEFORE ASSEMBLY @saveri_living www.saveri.de Page 1 (2016)
Page 2
2. To turn on the LED lamp, turn it over and push the circular rubber button on the base of the LED lamp (this will turn the LED lamp on or of ) 3. The LED lamp will operate continuously for at least 6.5 hours. 4. Recharging time is approximately 6 hours. TECHNICAL SPECIFICA TIONS Adapter Input: AC 100V -240V 50/60Hz. @saveri_living www.saveri.de Page 2 (2016)