Advertisement
Advertisement
Table of Contents
Summary of Contents for Denali MW1-SS
- Page 1 INSTALLATION & SET UP MANUAL Model Number: MW1-SS XOWater ttleless.com...
- Page 2 Tools You’ll Need Pull out on tab on Remove plug the back of the lid The Denali power cord is 6 You will need a bucket or a The electrical plug is located feet long - so it’s best to trashcan, a Phillips-head under the lid.
- Page 3 Using a Phillips-head The commercial filters that Inside of the cooler, locate screwdriver (photo shows come with your Denali are waterway inside the cooler Reach in the cooler and an electric screwdriver), too tall to be attached at the...
- Page 4 This is what the filter will middle filter bracket. look like when it’s set up Remove the black cap and and inside of the Denali push the waterway that cooler. goes TO cooler into head until it stops. Pull gently to make sure that it's secure.
- Page 5 Final Set-Up Push Safety Button Fill hot tank Hold until water Attach front panel Attach drip tray comes out of hot a) Press the red button on Place bottom of front panel Push drip tray back into the front of hot faucet into the base.
- Page 6 Troubleshooting: No Water From Cooler Water is off Remove float kit lid Rotate cooler to if last step didn’t get Press reset button Remove the float kit lid so back. Pull on tab on water flowing: If the backup float is tripped, that you can check it shuts off...
Need help?
Do you have a question about the MW1-SS and is the answer not in the manual?
Questions and answers