Advertisement
Quick Links
QUICK START GUIDE
What You Get
• SpyderX Sensor
• Serial Number
• Welcome Card – Including warranty information and download instructions
System Requirements
• Windows 7 32/64 and above
• Mac OS X 10.10 and above
• Monitor Resolution 1280x768 or greater
• 16-bit video card (24-bit recommended)
• 1GB of available RAM
• 500MB of available hard disk
• Internet connection for software download
• USB port
Support
support.datacolor.com
Advertisement
Summary of Contents for Datacolor Spyder X
- Page 1 • Mac OS X 10.10 and above • Monitor Resolution 1280x768 or greater • 16-bit video card (24-bit recommended) • 1GB of available RAM • 500MB of available hard disk • Internet connection for software download • USB port Support support.datacolor.com...
- Page 2 Before You Begin Your monitor should be turned on for at least 30 minutes before you begin the calibration process. Make sure that no direct light is falling on your display. Reset the monitor controls to the factory default settings, if available. Please deactivate any Auto Brightness features on your monitor.
- Page 3 Step 1 – Install and Activate Install the SpyderX Software from the Datacolor Website. After the installation is complete, plug in your SpyderX and launch the SpyderX software to begin the activation and registration process. This will automatically start your Warranty.
- Page 4 Step 2 – Prepare for Calibration Ensure your SpyderX is plugged into a powered USB port on your computer before you launch the SpyderX application. Follow the step-by-step on-screen instructions. Remove the lens cap from the SpyderX colorimeter. Hang the SpyderX unit over your display when asked, using the lens cap, which slides on the USB cable, as a counterweight to keep it in place.
- Page 5 Step 3 – Calibrate The SpyderX Software will walk you through the calibration process and create a custom display profile, which your operating system and color managed applications will use to correct your displayed colors. Roll your mouse over any feature or select the “Click to Learn More”...