Tech Lighting Zur Pathway 700OAZUR Series Installation Instructions Manual page 2

2B
Bring the power wires to the fixture location in
3
accordance with local electrical codes.
Connect the white fixture wire to one of the low-
4
voltage power line wire with the provided outdoor
waterproof wire nut.
Connect the black fixture wire to the remaining low-
5
voltage power line wire with the provided outdoor
waterproof wire nut.
2C
Stake the fixture to the desired location and properly
6
bury the wire and wire nut connections.
Install the Fixture to Concrete
(or other hard surfaces)
3A
5
6
1
2
3
3B
3
4
5
2
FIXTURE
0.58"
BASE PLATE
Bring the power wires to the fixture location in
accordance with local electrical codes.
Mount the base plate to an even and smooth surface
using the appropriate template, which can be found on
the following pages. Ensure that length of the lag bolts
or anchor bolts do not exceed 0.58" from the mounting
surface in order to leave enough clearance for the
fixture to fit properly over the base plate.
BASE PLATE
Bring the power wires to the fixture location in
accordance with local electrical codes.
Connect the white fixture wire to one of the low-
voltage power line wire with the provided outdoor
waterproof wire nut.
Connect the black fixture wire to the remaining low-
voltage power line wire with the provided outdoor
waterproof wire nut.
BASE PLATE
1
2
4
5