Proficient Protege F5 Series Owner's Manual page 4

12" Floor Standing Subwoofer
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAN ICES-3(B) / NMB-3(B)
AC INPUT
100–120 V~
50/60 Hz 2A
1
CONTROL PANEL FEATURES (See Diagram 2)
1. AC INPUT CONNECTOR - Connect the supplied line cord here. After all connections have been made
and confirmed, plug the power cord into an unswitched AC Outlet to power the sub. Contact Proficient
Audio Systems for a proper replacement should the AC Power Cord be damaged or misplaced.
2. POWER SWITCH- Turns the subwoofer on or off. Always turn the power OFF when making connections
to the sub.
3. LINE LEVEL INPUTS - These connect with RCA cables from the sub/LFE line-level output(s) of the receiv-
er or preamp. If there is only one output, use the left input jack.
4. HIGH-PASS OUTPUTS - These outputs a pass-through of the input signals with the bass frequencies
removed by a fixed high-pass crossover circuit. This output is not affected by the subwoofer's controls.
FS12
proficientaudio.com
Petaluma, CA USA
Made in China
ON OFF
POWER
2
0 dB
MIN MAX
90˚
0˚ 180˚
100 HZ
NORMAL
150 HZ
50 HZ BYPASS
GREEN-ON
RED-STANDBY
SIGNAL ALWAYS
SENSE ON
L
L/
LFE
Diagram 2: Subwoofer Control Panel Features
4
9
VOLUME
8
PHASE
7
CROSSOVER
FREQUENCY
6
TURN-ON
MODE
5
4
R OUTPUT
3
R INPUT