The Pulsed operation setting allows an output to activate as long as the button is held.
The Timed operation setting allows an output to activate when the transmitter button is pressed, and remain
activated for 10 seconds or until the transmitter button is pressed again.
The Latched operation setting allows an output to activate when the transmitter button is pressed, and remain
activated until the transmitter button is pressed again.
DISARM WITH AUXILIARY FUNCTION
If auxiliary 1 is installed to activate the vehicle's trunk release, the system can be programmed to automatically disarm
the alarm when the trunk is opened using the transmitter. In this manner, the trunk can be accessed without first
disarming the alarm.
REMOTE SENSOR DISABLE
When parking the vehicle in areas susceptible to unwanted disturbance from animals or strong weather conditions that
could cause the sensors to trigger, the sensor inputs can be temporarily bypassed using the remote transmitter,
preventing possible false alarms.
To disable the sensor inputs.
1. Arm the system normally.
2. Within 5 seconds of arming the system, press the arm button again.
• The siren will chirp 5 times and the parking lights will flash 5 times to indicate the sensors are disabled.
• The sensors will remain disabled until the next arming cycle.
E L E C T R O N I C S
Page 8
Copyright 2003 All Rights Reserved
I N C .
In House/Instructions/Manuals/AS635/805 Owner's Manual.cdr
SECURITY SYSTEM
WITH STARTER
AS635/805
OWNER'S MANUAL
Need help?
Do you have a question about the AS635/805 and is the answer not in the manual?
Questions and answers