Specifications; Installation Instructions; Before You Begin - utenu Skateboard Swing Manual

EN

Specifications

• Skateboard-shaped swing with adjustable handles
• Can be hung from a swing assembly or in a tree
• Swing measures: 78 x 19 x 1 cm
• The ropes are approximately 4.6 metres long
• Maximum load: 100 kg100 kg
• Material: swing made of Chinese maple, rope made of polyethylene
• The swing is lacquered to protect it from light rain, but it is not impregnated
• Cleaning: wipe with a damp cloth
• Not suitable for children under 3 years old. The child must be able to sit without
support to use the swing

Installation Instructions

Package contains: 1 x swing, 2 x ropes, 2 x snap hooks, 2 x wooden handles, 2 x
self-adhesive slipguards

Before you begin

We recommend that you install the swing hanging; that way you can adjust the height
you desire right from the start.
The swing assembly or tree to which you attach the swing should be at least 2.3 m high
and the swing should have at least 2.4 metres of clearance on all sides.
Attaching to a Tree
Take one of the ropes, fold it over into a double and hang it over a stable tree branch.
Pull the three loose ends through the loop in the double-folded rope so that the rope
attached around the branch. Then repeat with the other rope. There should be a space
of about 60-80 cm between the ropes at the branch.
Then follow the instructions from point 3.
5
4
3