Page 1
This document contains the following instructions: SYSTEM DIAGRAM for visualizing RFC-A-WIFI module setup SETUP OPTIONS for determining setup that best suits your network configuration WIRELESS NETWORK SETUP for optional wireless connection of RFC-A-WIFI module to network router using EasyLighting mobile app ™...
Page 2
Preferred configuration for system reliability OPTION #2: WIRELESS NETWORK RF Receiver RF Receiver To be used when location of RFC-A-WIFI module cannot be wired directly to network router due to RF range OPTION #3: WIRELESS DIRECT RF Receiver RF Receiver To be used when a network router is not available (requires manually switching mobile device’s wifi network to control lighting)
Page 3
An optional wireless network connection eliminates the need for a direct ethernet cable connection between the RFC-A-WIFI module and network router, allowing the module to be placed anywhere within range of your wireless network. Please note, however, that this option is not compatible with all network configurations due to various security and encryption protocols.
Page 4
Move finger along color wheel (Fig.6) until lighting flashes to confirm room assignment. *Steps b & c must be completed within a ten second period. Questions/Support | 800-789-3810 | quotes@kelvix.com 012218NH...
Page 5
On/Off: Press the on/off button [ ] to toggle Color Wheel: Touch desired color on touch- all zones between off and each of their last ‘on’ sensitive color wheel [ ] to select light color. settings. Questions/Support | 800-789-3810 | quotes@kelvix.com 012218NH...