Advertisement
The maximum number of luminaires with driver
40W to be connected in MCB 16A TYPE B
(mains impedance 200 mΩ + 400 µH)
Inrush current lpeak*
Inrush current Twidth **
* input voltaje 230V
** input voltaje 230V, measured at 50% lpeak
The maximum number of luminaires with driver
75W to be connected in MCB 16A TYPE B
(mains impedance 200 mΩ + 400 µH)
Inrush current lpeak*
Inrush current Twidth **
* input voltaje 230V
** input voltaje 230V, measured at 50% lpeak
The luminaire is protected against water ingress to IP66. Sealed design ensures that this rating
will be maintained over the full lifetime of the product.
The luminaire may be cleaned by brush with short&soft bristles.
Extra care must be taken when cleaning around the external cables and
connector in order to prevent damage.
Do not use high pressure water jet or high pressure cleaners.
If clear water is not sufficent for cleaning, use a neutral, synthetic, not-scratching and non-abrasive
subtances.
Never use alkaline and/or acetous cleaning substances. Make sure that cleaning substance is fully
removed by rinsing with clean water.
Full Prog
Coded Mains
20
22 A
290 µs
Full Prog
Coded Mains
11
65 A
65 A
330 µs
330 µs
CLEANING
9/12
System Ready
20
21
22 A
21 A
290 µs
300 µs
System Ready
11
6
21 A
300 µs
Advertisement
