Panasonic LIFI PT-56LCX70 Operating Instruction page 30

Projection Display operation (continued)
Channel and Program Tuning
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed. (p. 26-27)
Follow the procedure below to directly enter the channel
number using the NUMBER keys.
Select analog channel
Procedure
1. Press the NUMBER keys to enter the Channel
number. Press OK.
• The following is an example of tuning to channel 15.
Direct Tuning Example Direct Tuning Example
Step Step
1 1
2 2
3 3
Note
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Select digital channel
Procedure
1. If tuning a digital channel and your channel
contains more than one program, press
PROG- and enter the program (1, 2, 3 etc.)
using the NUMBER keys. Press OK.
• The following is an example of tuning to channel 15-1.
Direct Tuning Example Direct Tuning Example
Step Step
1 1
2 2
3 3 Press PROG- Press PROG-
4 4
5 5
Note
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
30
Action Action Channel Banner Display Channel Banner Display
Press 1 Press 1
Press 5 Press 5
Press OK Press OK
Action Action Channel Banner Display Channel Banner Display
Press 1 Press 1
Press 5 Press 5
Press 1 Press 1
Press OK Press OK
Unit Status Display
Press CH
screen is dis played, to display current unit status
information.
Channel Banner: Minimized
Procedure
1. Press CH
channel banner.
•
1 1 Channel Banner: Maximized
15 15
Procedure
15 15
1. Press RECALL to maximize the displayed
channel banner.
Channel, Program and Station identifier Channel, Program and Station identifier
15-2 15-2
ABC-HD ABC-HD
Closed Caption Closed Caption
Audio Mute
Press MUTE to instantly mute the sound. Press again to
restore the previous sound level.
Procedure
1 1
15 15
1. Press MUTE to mute the sound. Press again
15- 15-
to reactivate sound.
15-1 15-1
•
15-1 15-1
Note
• The audio output from AV OUT is not muted.
or RECALL, except when the MENU
to minimize the displayed
It will display the channel number, and the station
identification (if available).
Program title Program title
Andrew's cooking show Andrew's cooking show
CC SAP CC SAP TV-G TV-G 1080i 1080i
Rating Level Rating Level Picture mode Picture mode
SAP indication Signal resolution SAP indication Signal resolution
Sound is also reactivated when power is turned off or
volume level is changed.
Channel Number Channel Number
15-2 15-2
ABC-HD ABC-HD
Station Identifier Station Identifier
30 30
Standard Standard 4:3 4:3
Time remaining Time remaining
in Sleep Timer in Sleep Timer
Aspect ratio Aspect ratio