Resume Function; Frame By Frame Picture - Panasonic Omnivision PV-D4733S Operating Instructions Manual

*Important: If a remote control button does not work when pressed,
I Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-
during play.
Press PLAY to release.
• Starting forward/reverse search during play
started from menu on Video CDs may recall menu.
• Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
I Forward/Reverse Chapter/Track Skip
Press SKIP | or |
Each press skips a chapter (DVD) or
track (Video CD/CD).
SKIP once midway through a
• Pressing |
chapter/track returns to the start of that
chapter/track. Each additional press skips
back one chapter/track.
• Pressing SKIP
from menu on Video CDs may recall menu.
Current playback position
Chapter/Track Chapter/Track
Reverse Skip
I
Still Picture or Pause
Press PAUSE/STILL during play.
Press PLAY to release.
• DVD/Video CD : DECK will enter still picture mode.
• CD : DECK will enter pause mode.
I Frame by Frame Picture
(DVD/Video CD)
Press PAUSE/STILL in still mode.
Press PLAY to release.
• Each press advances picture one frame.
• Hold button down for consecutive frame advance.
• Whether pictures are advanced by "FRAME" or
"FIELD" is selected automatically. (See p. 49)
I
Slow Motion Picture
Press FF/SLOW+ or REW/SLOW-
in still mode.
Press PLAY to release.
• Slow motion speed, slow at first, is increased
with each additional press of the button up to
5 levels.
• Reverse slow motion is not available for Video CDs.
Auto-Power Off Function
Power turns off after DECK has been in
Stop mode (DVD) for about 5 minutes.
• When appears on the screen while a button
is being operated, it means that the
corresponding operation is prohibited by DECK
or the disc.
press the DVD button on the remote and try the button again.
SKIP during play.
| or | during play started
Chapter/Track Chapter/Track
Forward Skip
(DVD/Video CD)
V.S.S.
(Virtual Surround Sound)
Enjoy a surround-like effect if you are
using two front speakers only. The effect
is broadened and sound seems to come
from virtual speakers on either side if the
disc has surround signals recorded on it.
Press VSS in DVD mode.
• The Surround sound effects can be
changed by pressing VSS repeatedly as
shown by the figure below.
VSS OFF
VSS OFF (default)
Note
• Surround sound effects is available in DVD
mode only.
• Turn off the surround effects on the other
equipment.
• V.S.S. will not work, or will have less effect,
with some discs.
• Turn V.S.S. off if it causes distortion.
• Sound will only come from the two front
speakers if V.S.S. is on.

Resume Function

DECK memorizes the point where STOP is
pressed (STOP is displayed on screen).
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is not
canceled when power is turned off and on.
• RESUME works only with discs for which
elapsed play time is displayed during play.
Enjoy Video CDs featuring
playback control without using
menus (Video CDs only)
1. Do steps 1-4 (previous page).
When menu appears, press STOP .
2. Press NUMBER keys to select desired
track (play begins).
• Check disc for track numbers.
• Press "1" to start at beginning of disc.
To Resume Menu use,
Press STOP and press PLAY , then the
menu will be displayed.
Now, go to step 5 (previous page).
Notes
• Please read the disc jacket for operation
information.
• If a single sided disc is placed in upside
down, "THIS TYPE OF DISC CANNOT BE
PLAYED. PLEASE INSERT A DIFFERENT
DISC" is displayed.
• Remove disc and press DECK POWER off
when not in use.
• Disc continues to rotate with menu displayed
even after play is done.
Press STOP to clear menu display when
finished with menu.
VSS1
VSS2
VSS3
23