Installation; Television Location; Optional Cable Connections; Ac Power Supply Cord - Panasonic CT-20DC50 Operating Instructions Manual

I
NSTALLATION

Installation

Television Location

This unit is intended to be used with an optional stand or entertainment center. Consult your
dealer for available options.
•
•
•
•
CAUTION:
bracket, or table specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over. In order to avoid injury to children, never place your
television receiver on a piece of furniture that is capable of being tilted by a child
leaning on it, pulling on it, standing on it, or climbing on it.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:
•
•
•

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR
PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE
THEY EXIT FROM THE APPARATUS.

Cable / Antenna

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company.
Note:

Antenna Connection

Note:
6
Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
Fluorescent lighting may reduce remote control transmitting range.
Avoid magnetic equipment, including motors, fans, or external speakers.
Use this television receiver only with the cart, stand, tripod,
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors that match your component connectors.
Avoid long cables to minimize interference.
A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
• For proper reception of VHF/UHF channels,
antenna is required. For best reception an outdoor antenna
is recommended.
Antenna Mode must be set to TV in the SETUP menu
•
Cable Mode is preset at the factory. Antenna users must change
to Antenna Mode in the Setup Menu.
Polarized plug
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
an external
on back of TV
. Incoming Cable from
Home Antenna