Tape Operation (continued)
Repeat Play
Set to see a recording over and over.
PLAY
REPEAT ON
To turn "ON,"
press PLAY/REPEAT on the unit
repeatedly in Play mode to select
"REPEAT ON".
To turn "OFF,"
repeat above to select "REPEAT OFF."
• Playback repeats when tape end is
reached or an unrecorded portion longer
than 30 seconds is detected.
Note
• For repeat play in DVD mode, see page 55.
Zero Search
To quickly return to a specific tape counter location.
1
Press DISPLAY* during playback
to display the Counter.
2
PLAY 12 : 00 PM
3
Continue playback, rewind, or
fast forward.
4
Press STOP.
5
Press CM/ZERO in stop mode to
start ZERO SEARCH.
• Unit goes into FF or REW mode and
stops at the last point the Counter was
set to 0:00:00.
36
For assistance, please call : 1-800-211-PANA(7262) or send e-mail : consumerproducts@panasonic.com
Press COUNTER
0 : 00 : 00
RESET at the
SLP
desired position to
reset to "0:00:00."
PLAY/REPEAT