Forest LEAN-TO KIT Instructions

Making British gardens great
LEAN-TO KIT
We recommend using the following tools (NOT SUPPLIED):
Tape Measure Pozidrive
Screwdriver
It's vital that you build your new lean-to addition on level ground in your
desired location.
IMPORTANT
Assembly requires 2+ adults.
1
A B
Using the measurement provided and mark,
pre-drill and screw through the brace into the
post. Ensure the brace is flush to the one face/
edge as shown above. Use the section layout to
determine the correct brace directions before
screwing.
4
BACK
FRONT
Screw the fascias to the lean-to. Ensure it is flush with
the sheds fascias. Screw through the fascias into the
roof battens behind.
Missing Something?
Call our aftersales team on
0333 777 7089
Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
Drill & 2mm
Drill Bit
KEY
A B
Determines which side the brace will be
screwed onto the post.
2
207mm
Apply the roof. Ensure the posts
are in contact with the faces/
edges of the internal roof battens.
Screw through the roof battens
into the posts and braces as
Need more information?
Call our technical team on
0333 321 3142
INSTRUCTIONS

FIXING PACK CONTAINS:

Spirit Level
3
Screw the lean-to to your shed, using all the screws
provided to keep secure. Ensure the roof external roof
battens on the lean-to are in contact with the shed
external roof battens. Ensure the roof batterns are
shown above.

SECTION LAYOUT (UNDERNEATH)

FRONT
A
64LTKM
BACK
FRONT
A A
75LTKM
1086mm
BACK
FRONT
A A
86LTKM
1205.5mm
BACK
ISSUE: 0219
FIXING PACK CODE: LTKMFP
PLEASE KEEP PLASTIC BAGS AND SMALL
PARTS AWAY FROM CHILDREN
REMINDER
Always pre-drill before screwing.
flush to the shed roof battens.
B
The 6x4 lean-to will only have 2 posts/braces
provided.
The 7x5 lean-to will have a central post
B and brace. Use the central roof batten to
screw it into place. Use the measurement
provided to put it on the correct side of
the roof batten.
The 8x6 lean-to will have a central
post and brace. Use the central roof
B
batten to screw it into place. Use the
measurement provided to put it on
the correct side of the roof batten.
Visit our website for spare
instructions and more
information
www.forestgarden.co.uk
Felt Tacks
QTY: 46