Tv Timer Features; On-Timer With Alarm - Panasonic PV-C2063 Operating Instructions Manual

TV Timer Features

ON-TIMER with Alarm

This unit can be set to automatically power on in one of 3
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
Press PROG* to display SET PROGRAM screen.
1
2
SET PROGRAM
T I MER PROGRAMMING
ON TIMER
SELECT :
END : PROG
ON T I MER
3
6:--AM CH --
ALARM : ON
SELECT :
END : PROG
• Make sure a tape is inserted if Playback mode is selected.
• See "FM Radio" on page 20 for instructions on how to preset
FM stations.
CH02 CH03
CH01
FM9 FM8
4 ON T I MER
6:00AM CH08
ALARM : ON
CANCEL : ADD / DLT
SELECT :
END : PROG
When "ON" is selected, an alarm will gradually increase
in volume for one minute or until canceled by pressing any
button (including VOL + -).
To Make Corrections, use
and correct.
Press PROG to set ON TIMER.
5
• "ON TIMER SET" is displayed.
• ON TIMER Indicator lights on the unit.
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the
time in step 3. Now, press PROG to end.
"ON TIMER END" briefl y appears on-screen.
16 16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1) Press
TIMER".
2) Press
TIMER screen.
SET :
1) Press
desired settings.
2) Press
ON-TIMER TIME or
ON-TIMER mode.
SET :
CH125
• ON-TIMER mode
PLAY
selection order
FM1
Press to select
ALARM "ON" or "OFF".
SET :
and to move back
to select "ON
to display ON
to select
to set the
Note
• If no button on the remote or unit
(including a button used to turn
off the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
Ready Check List
The clock is set to the correct time.
TIMER/FM
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM
VIDEO IN AUDIO IN
ACTION
CH
ON TIMER
indicator
REC ON TIMER PROG TIMER