Remote Control Operation; Operating Range; Turning On The Button Backlight; Switching The Preset Settings - Panasonic PT-AX200U Operating Instructions Manual

Remote control operation

Operating range

Turning on the button backlight

In a dark room, you can turn on the button
backlight to operate the remote control.
Press the LIGHT button on the upper right
corner of the unit to turn on the backlight and
enter the light-on mode.

Switching the preset settings

You can switch the preset settings by pressing the THEATER ROOM, LIVING ROOM, FAVORITE LOAD buttons.
See "FAVORITE LOAD" on page 32.
Recommended for viewing in dark room.
CINEMA1
CINEMA2
Recommended for viewing in lit room.
NORMAL
GAME
E
22 - NGLISH
You can operate the projector with the remote control
within the remote range 7 m (22'11").
NOTE:
After 5 seconds without any operation, the backlight will
be faded, and it will go out after another 5 seconds.
Press any but the LIGHT button to turn on again. To
escape from the light-on mode, press the LIGHT button.
NATURAL
DYNAMIC
VIVID CINEMA
Facing to the projector
Ensure the remote control emitter is facing to the
remote control signal receptor on front/back of the
projector and press the required buttons to
operate.
Facing to the screen
Ensure the remote control emitter is facing to the
screen and press the required buttons to operate
the projector. The signal will be reflected off the
screen. The operating range may differ due to the
screen material. This function may not be effective
with a translucent screen.
• Do not let strong light shine onto the signal receptor.
The remote control may malfunction under strong light
such as fluorescent.
• If there are any obstacles between the remote control
and the remote control signal receptor, the remote
control may not operate correctly.
Disp FAVORITE LOAD menu. See
lay the
"FAVORITE LOAD" on page 32.