Advertisement
Using your microwave oven
Microwave oven controls
There are three parts in the control section:
-The Digital Display/Clock,
and Indicator
Lights
-Command
Pads
- Number
Pads
Instructions for each control are covered
on the
following
pages
Read them carefully.
When you first plug in the oven, the Display
will
show 88:88. If, after you set the Clock (page
6) the
Display
again
shows all 8's, it means your elec-
tricity was off for a whrle. Reset the Clock.
Digital
display/clock
and
indicator
lights
When you are not
using the microwave
oven, this is an accu-
rate digital
clock.
When you are using
the microwave
oven,
this displays
time
settings and shows
you what Number
Pads you touched.
Command
pads
Touch Command
Pads to tell the micro-
wave oven what to
do and in what order.
A few examples:
-CLOCK
SET tells the
oven you are going
to set the clock.
- START tells the oven
to start. See page
13 for information
on the tone you hear when touching
any pad.
Each Command
Pad (except
START and CANCEL)
iights an Indicator
Light on the digital
display.
The Indicator
Light comes on when you touch the
Command
Pad.
While the oven is running, an Indicator
Light (or
lights will be on to show what the oven is doing.
Once you've touched
a Command
Pad to
tell the oven what you
want it to do, you'll
touch Number
Pads to
tell it...
- a time,
-a
Cook Power.
- a food
temperature
5
Advertisement
