1. Manuals
  2. Brands
  3. Clemco Manuals
  4. Lighting Equipment
  5. BEACON LED BLAST LIGHT
  6. Manual

Clemco BEACON LED BLAST LIGHT Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
© 2017 CLEMCO INDUSTRIES CORP.
One Cable Car Dr.
Washington, MO 63090
Phone (636) 239-4300
Fax (800) 726-7559
Email: info@clemcoindustries.com
www.clemcoindustries.com
BEACON
LED BLAST LIGHT
O. M. 27765
DATE OF ISSUE:
REVISION:
WARNING
Do not use this
equipment until you
have READ this
MANUAL and YOU
UNDERSTAND its
contents. *
These WARNINGS are
included for the health
and safety of the
operator and those in
the immediate vicinity.
*If you are using a Clemco Distributor
Maintenance and Parts Guide, refer to
the orange warnings insert preceding
the Index before continuing with the
enclosed instructions.
Electronic files include a Preface
containing the same important
information as the orange cover.
07/14
B, 09/17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BEACON LED BLAST LIGHT and is the answer not in the manual?

Questions and answers

Summary of Contents for Clemco BEACON LED BLAST LIGHT

  • Page 1 © 2017 CLEMCO INDUSTRIES CORP. the immediate vicinity. One Cable Car Dr. Washington, MO 63090 *If you are using a Clemco Distributor Phone (636) 239-4300 Fax (800) 726-7559 Maintenance and Parts Guide, refer to Email: info@clemcoindustries.com the orange warnings insert preceding www.clemcoindustries.com...

  • Page 2: General Instructions

    Clemco manufactures. Users must contact each Abrasive Blasting. manufacturer and supplier of products used in the blast job for Clemco Industries Corp. One Cable Car Drive Washington MO 63090 warnings, information, training, and instruction relating to the Tel: 636 239-4300 — Fax: 800 726-7559 proper and safe use of their equipment.

  • Page 3: Operational Instructions

    Numerous topics associated with the hazards of crystalline silica in silica blasting sand can be found on http:// osha.gov/. Clemco urges users of silica blasting sand to visit this website, and read and heed the information it contains.

  • Page 4: Maintenance And Repair

     Exceeding the maximum working pressure. Clemco blast machines are built to ASME-code and carry a ‘U’ or ‘UM’ stamp, and National Board/serial number. Every machine is marked with its maximum working pressure. Never exceed the maximum working pressure limits of the blast machine.
  • Page 5 Always ground the machine to eliminate hazard of static shock. Install a blast machine screen to keep out foreign objects. Use a blast machine ©Clemco Industries Corp., Stock No. 20954P, 0692 Rev. F, 06/12 cover if left outdoors overnight. Never exceed the maximum working pressure of the vessel.
  • Page 6  120-volt AC assembly with 100-ft. supply cable CAUTION Two nylon cable ties 2-ft. Adhesive-backed gasket Caution indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. © 2017 CLEMCO INDUSTRIES CORP.  www.clemcoindustries.com  Manual No. 27765 Rev. B...
  • Page 7 © 2017 CLEMCO INDUSTRIES CORP.  www.clemcoindustries.com  Manual No. 27765 Rev. B...

  • Page 8: Operation

    2.4.1 A 16-gauge or larger extension cord may be used, but not to exceed a total length of 300 feet from the power supply to the lamp. © 2017 CLEMCO INDUSTRIES CORP.  www.clemcoindustries.com  Manual No. 27765 Rev. B...

  • Page 9: Maintenance

    * Included in inner lens service kit 5.1.4 Discard the frosted lens and inspect the O-ring. Figure 5 Replace the O-ring if it is compressed or damaged. © 2017 CLEMCO INDUSTRIES CORP.  www.clemcoindustries.com  Manual No. 27765 Rev. B...

  • Page 10: Troubleshooting

    (+) serviceable; replace it. and the black wire goes to negative (-). The light will not operate if reversed. © 2017 CLEMCO INDUSTRIES CORP.  www.clemcoindustries.com  Manual No. 27765 Rev. B...

  • Page 11: Replacement Parts

    Service kit, glass outer, ..refer to Section 7.2.1 Service kit, poly inner, ..refer to Section 7.2.2 **14 * Used only with 120-volt lights ** Used only with 12-volt lights Figure 8 © 2017 CLEMCO INDUSTRIES CORP.  www.clemcoindustries.com  Manual No. 27765 Rev. B...

This manual is also suitable for:

27765

Table of Contents