INTRODUCTION Thanks for purchasing this product from the AV Toolbox Division of TV One. The AVT-6114 1x4 HDMI v1.3 Splitter allows distribution of an HDMI signal to 4 displays or other HDMI compliant devices. This version v1.3 HDMI device supports all standard High Definition Television formats, PC formats from XGA through UXGA as well as providing transport of embedded HD-Audio, including Dolby®...
Page 5
There are many factors affecting the quality of results when distributing HDMI type signals. Some basic precautions will ensure the best possible performance from your AVT-6114 1x4 HDMI v1.3 Splitter. Output display device – The quality of the output signal will depend largely upon the type and quality of the HDMI display device used.
CONNECTING THE HARDWARE Connect the HDMI Video Source to the input of the AVT-6114 Splitter, connect its outputs to HDMI Compliant monitors –– or other HDMI compliant devices –– and then connect the AC to DC Power Adapter. The drawings below show the...
You can connect any HDMI device’s output to the AVT-6114’s input. Make certain that the HDMI cable is securely plugged into the source device as well as the AVT-6114. Always use a high quality cable, as short a length as possible, for best results.
bad cables or a problem with the other devices. If you are unable to obtain a signal using this simplified path, suspect the cables, the source device or the destination device(s). After trying th e above suggestions sh ould the problem still persist, contact your dealer for additional suggestions before contacting TV One.
8.0 REGULATORY COMPLIANCE The AVT-6114 has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations and/or Guidelines. These Products and Power Adapters are RoHS Compliant.
Need help?
Do you have a question about the AVT-6114 and is the answer not in the manual?
Questions and answers