Mastiff 200 Table of Contents Specifications Safety instructions Safety instructions Operating instructions Operating instructions Electrical safety Parts Listing – Main Chassis - Petrol Parts Listing – Main Chassis - 1 Phase Parts Listing – Main Chassis - 3 Phase Parts Listing – Inner Chassis – Petrol Parts Listing –...
Mastiff 200 Safety instructions Read and understand the instructions on the machine and in this manual and engine manual (if applicable). Different models may have different parts and controls. Equipment should only be operated by trained personnel, in good physical condition and mental health (not fatigued). The operator and maintenance personnel must physically be able to handle the bulk weight and power of this machine.
Mastiff 200 Safety instructions Do not modify machine in any way. Only use genuine MASTIFF 200 parts and accessories. Repairs should be performed by qualified persons only. Ensure parts have stopped moving and disconnect power or spark plug when servicing or changing blades or accessories.
Mastiff 200 Operating instructions Wear clothes suitable for the job and for the work place including, safety shoes, hard hat, hearing protection, non-fogging vented safety goggles, and dust respirator suitable for dust. WARNING! POISONOUS EXHAUST GASES. Do not operate petrol powered equipment without adequate ventilation.
Page 7
GPO outlet). Refer above for recommendations on power leads. Rectify problem or decrease load on grinder by using tooling with more surface area. Continuing to use the MASTIFF 200 when constant tripping occurs, VOIDS THE WARRANTY! FLOOREX- 1800...
Mastiff 200 Operating instructions This machine is designed to operate with the wheels in contact with the floor at all times. Do not operate with wheels off the floor. Push the fast raise lower lever forward then wind the depth control anti clockwise to lower to tools onto the floor.
Never use equipment that has not been tested and tagged (including cords). Do not operate MASTIFF 200 with any covers or doors removed or open. Before connecting the machine to power, check the condition of all power leads and cables on, or used in conjunction with the machine. DO NOT USE it if any fault(s) cuts;...