The Light Source MegaBatten Installation Manual

Connector strip

EGA

Connector Strip

BEFORE YOU BEGIN

READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY

RISK OF ELECTRIC SHOCK

•

TURN POWER OFF BEFORE INSPECTION,

REPAIR, INSTALLATION, OR REMOVAL.

•

PROPERLY GROUND ELECTRICAL

ENCLOSURE.

•

FOLLOW ALL NEC AND LOCAL CODES.

•

USE ONLY UL APPROVED WIRE FOR INPUT

OUTPUT CONNECTIONS.

ALL MECHANICAL AND ELECTRICAL CONNECTIONS ARE TO BE MADE BY

QUALIFIED INDIVIDUALS FAMILIAR WITH LOCAL CODES, CONSTRUCTION

PRACTICES, AND THE HAZARDS INVOLVED.

SAVE THESE INSTRUCTIONS

USE PRODUCT ONLY IN THE MANNER INTENDED BY THE MANUFACTURER. IF YOU HAVE ANY QUESTIONS, PLEASE

CALL

THE LIGHT SOURCE, INC. 704-504-8399

IGHT

MADE IN THE USA

ATTEN

WARNING/AVERTISSEMENT

RISQUES DE DÉCHARGES ÉLECTRIQUES

•

CAUTION

OURCE,

COUPEZ L'ALIMENTATION AVANT D"INSPECTER, INSTALLER OU

DÉPLACER LE LUMINAIRE.

ASSUREZ-VOUS DE CORRECTEMENT METTRE À LA TERRE LE

BOÎTIER D'ALIMENTATION ÉLECTRIQUE.

RESPECTEZ TOUS LES CODES NEC ET CODES LOCAUX.

N'UTILISEZ QUE DES FILS APPROUVÉS PAR UL POUR LES

ENTRÉES/SORTIES DE CONNEXION.

NC.

Table of Contents

Need help?

Do you have a question about the MegaBatten and is the answer not in the manual?

Page 1 ALL MECHANICAL AND ELECTRICAL CONNECTIONS ARE TO BE MADE BY QUALIFIED INDIVIDUALS FAMILIAR WITH LOCAL CODES, CONSTRUCTION PRACTICES, AND THE HAZARDS INVOLVED. SAVE THESE INSTRUCTIONS USE PRODUCT ONLY IN THE MANNER INTENDED BY THE MANUFACTURER. IF YOU HAVE ANY QUESTIONS, PLEASE CALL THE LIGHT SOURCE, INC. 704-504-8399...
Page 2 PREPARING FOR ASSEMBLY Before starting the assembly process, please check the contents against all provided drawings for completeness. Splice set screws are shipped in a bag secured to the M . While unloading ATTEN your M check for damage that may have occurred during shipping. ATTEN, Prepare an adequate space to assemble your M .
Page 3 8-foot centers. CAUTION! PRIOR TO INSTALLATION, VERIFY WITH A STRUCTURAL ENGINEER THAT SUPPORTING STRUCTURAL ELEMENTS ARE CAPABLE OF SUPPORTING THE MEGABATTEN AT MAXIMUM LOAD. PLEASE ENSURE THAT RIGGING IS IN COMPLIANCE WITH LOCAL BUILDING CODES AND SAFETY PRACTICES.
Page 4 MAKING ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS MAY ONLY BE MADE BY INDIVIDUALS FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THIS PRODUCT AND THE HAZARDS INVOLVED. Connecting Power There are four options for Power input into the batten. 19 Pin Male Circular Connector (Socapex) – This connector comes pre-wired ready to connect to a female connector SO Cable –...