Whirlpool MT6120XE Use & Care Manual page 47

TURNTABLE
PROBLEM
The turntable will
not turn.
0 The turntable is not correctly in place. It should be correct-side up and sitting
firmly on the center shaft.
0 The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized Whirlpool service
technician for repair. Cooking without the turntable can give you poor results.
[ONES
PROBLEM
CAUSE
You do not hear the 0 You have not entered the correct command.
programming or end-
of-cycle tone.
0 You have turned off the tone. See "Audible signals" in the "Control panel
features" section.
FAN PROBEMS
PROBLEM
CAUSE
The fan seems to be 0 The oven has been stored in a cold area. The fan will run slower until the
running slower than usual.
oven warms up to normal room temperature.
DISPLAY MESSAGES
PROBLEM
The display is flashing
"00:0a."
CAUSE
0 There has been a power interruption. Reset the clock. (See "Setting the
clock" in the "Getting to Know" section.)
If none of these items are causing your problem, see the "Requesting Assistance or Service" section.
47