Viessmann 4129 Operation Manual page 3

1. Important information
Please read this manual completely and attentively before
using the product for the first time. Keep this manual. It is part
of the product.
1.1 Safety instructions
Caution:
Risk of injury!
Due to the detailed reproduction of the original and the
intended use, this product can have peaks, edges and
breakable parts. For installation tools are required.
1.2 Using the product for its correct purpose
This product is intended:
- For installation in model train layouts and dioramas.
- For connection to an authorized model train transformer
(e. g. item-No. 5200) with admitted operating voltage.
- For operation in dry rooms only.
Using the product for any other purpose is not approved and
is considered incorrect. The manufacturer is not responsible
for any damage resulting from the improper use of this
product.
1.3 Checking the package contents
Check the contents of the package for completeness:
- Bridge mast
- Groundsocket
- Screw
- Bracket for Märklin bridges
- Universal base
- Manual
2. Mounting
Figures 2 – 11 please see on page 2.
Caution:
Never touch the mast but only the patented base socket (fig. 1).
Slide the mast from the groundsocket.
2.1 Mounting on Märklin bridges
- Push the groundsocket on the bracket for Märklin bridges
(fig. 2 + 3).
- Clip the bracket with the groundsocket sidewards under
your bridge and slide the bridge mast onto the groundsocket
(fig. 4 – 6).
2.2 Mounting on other manufacturers' bridges
- Screw the groundsocket with the enclosed screw onto the
universal base (fig. 7 + 8).
- Apply a bit of glue to the marked points of the universal
base (fig. 8) and glue it to the bridge (fig. 9).
- Slide the bridge mast onto the groundsocket (fig. 10 + 11).
The latest version of the manual can be looked up at the
Viessmann homepage entering the item-No.
3
EN
Viessmann
Modelltechnik GmbH
Bahnhofstraße 2a
D - 35116 Hatzfeld-Reddighausen
www.viessmann-modell.de
Made in Europe
92364
Stand 03/sw
04/2017
Ho/Pic