Subscribe to Our Youtube Channel
Summary of Contents for Len Matec SERV & TWIST 1000
- Page 1 SERV & TWIST “1000” ©®TM USER’S MANUAL Design and Construction Len Matec bvba www.lenmatec.be Exclusively distributed by Dream Bow Factory Distr. GmbH...
-
Page 2: Introduction
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® www.dreambowfactory.eu Version 1-2017 Introduction Thank you for purchasing the SERV & TWIST “1000” ®©™. This user’s manual will explain you to operate and to maintain the SERV & TWIST “1000”... -
Page 3: Table Of Contents
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Content INTRODUCTION CONTENT 1. INTRODUCTION 1.1 PRODUCT DESCRIPTION 1.2 MAINPARTS OF THE SERV & TWIST “1000” ®©™ 1.3 CONDITIONS OF USE 1.4 INSTRUCTION FOR USER 2. SAFTEY PRECAUTIONS 2.1 INTRODUCTION 2.2 APPLICABLE PRECAUTIONS... -
Page 4: Introduction
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Introduction Product description The SERV & TWIST “1000” ®©™ (from this point on called S&T) is a machine that is designed and constructed to make bowstrings. Herby it is possible to choose the speed of the motor, quantity of windings and length for the bowstring. -
Page 5: Mainparts Of The Serv & Twist "1000
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Main parts of the SERV & TWIST “1000” ®©™ The S&T is made of number of main parts, indicated on the picture below. emergency stop engine adapter + power cable control panel Main block SERV &... -
Page 6: Conditions Of Use
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® 1.3 Conditions of use Only use the S&T under following conditions: Make sure the user of S&T has read and understood this User’s Manual All Safety precautions fulfilled. There is no damage to the S&T No other condition disturbs normal working of the S&T. -
Page 7: Saftey Precautions
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Safety precautions Introduction In this chapter, the safety precautions are treated. Every user of the S&T shall follow these instructions. If there is any safety aspect not clear, please check the User’s manual or ask for more information from the safety advisor or from your dealer. -
Page 8: Other Aspects Of Precautions
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Other aspects to consider in terms of safety DO NOT OPEN housing of the control panel when under voltage When the house of the control panel is open, do not put any voltage on the device Cooling openings in the control panel must remain free, not sealed, etc. -
Page 9: Working With The Serv & Twist "1000
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Working with the SERV & TWIST “1000” ®©™ Intro Operating the S&T is very simple. However, it is of great importance to respect and apply all safety precautions. Mounting of the S&T Mount both main blocks on the aluminium rails (can be ordered separately). - Page 10 SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Working with the S&T Step 1 Connect the power The following image appears When the image below appears, this means that the emergency stop is activated. To unlock the emergency stop, you must make a spinning motion.
- Page 11 SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Step 2 Setting the language Press this button choose your language and press on home page Step 3 Serving or twisting Press this button to switch between Serving and Twisting...
-
Page 12: Serv Function
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® 3.5 SERV function Functions of the buttons when starting the SERV function: “ON” / “OFF” of the motor Number of serving turns the engine makes during 1 Start and stop... - Page 13 SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Functions of buttons during the SERV function: Number of revolutions set for 1 Stop the motor temporarily cycle Number of revolutions left to Speed while serving complete the cycle If something goes wrong, you can stop turning the motor at any time by pressing...
-
Page 14: Twist Function
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® 3.6 TWIST function Functions of the buttons when starting the TWIST function Number of twists the motor makes during 1 cycle “ON” / “OFF” motor (limited to 20 p/cycle) Start and stop... - Page 15 SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® Functions of buttons during the TWIST function: Number of twists set for 1 cycle Stop the motor temporarily Number of twists left to complete Speed while Twisting the cycle If something goes wrong, you can stop turning the motor at any time by pressing the emergency stop Please ask your distributor for more info if you find any problem operating the S&T...
-
Page 16: Dimensions
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® 4. Dimensions (in mm) -
Page 17: Date Sheet
SERV & TWIST “1000” User’s Manual Len Matec bvba ©™® SERV & TWIST “1000” ©®TM DATASHEET Motor Voltage ( U ) 24V DC Phase (I) Max. Torque 2 Nm Max. Speed 1000rpm Transfo Modell 120W Input 100 - 240V - 1.2A... - Page 18 SERV & TWIST “1000” User’s Manual Len Matec bvba ©™®...
Need help?
Do you have a question about the SERV & TWIST 1000 and is the answer not in the manual?
Questions and answers