VAROMORUS TURBO User Manual page 2

COMPONENTS OF THE VAROMORUS FOGGER:
12
1. Gas-burner
2. Fluid pump
3. Fluid tank (white jar for soluton)
4. Automatc piezo igniton
5. Fluid tank lid
6. Fixaton hole for the fuid tank
7. Extension nozzle
8. Gas valve
9. Trigger
10. Bolt for dose adjustment of fuid supply
11. Ring for clamping a gas cylinder
12. Fine parts flter
EXAMPLE MIXING INSTRUCTIONS:
!Safety frst: Wear protectie gloies, a respirator, and protectie glasses while
using the fogger.
Preparaton of treatment fuid # 1
Add 15 grams of the oxalic acid to 100 milliliters of 96% ethyl alcohol. Strring, warm
up the fuid on a water-bath (t 40-50°C / 104-122 °F) untl the acid crystals are com-
pletely dissolved. Do not boil it. Add 15 grams of thymol to the soluton. Str around
untl the fuid of the noted compositon dissolves well without the formaton of ox-
alic acid crystals. This amount of fuid is calculated for processing of 25 beehives. It
retains it's propertes for 2-3 weeks.
Preparaton of treatment fuid # 2
Add 5 ml of "Bipin" or "Taktc" to 100 ml of purifed kerosene. During this, a homo-
geneous fuid of white hue should be formed, without any sediment. This amount
of working fuid is calculated for processing of 50 beehives. It retains it's propertes
for several months.
Preparaton of treatment fuid #3
Add 5 ml of clartane or tau- fuvalinate to 100 ml of water. Preheat in a water bath
(t 40-50 °C/ 104-122 °F) untl completely dissolved. Such working fuid must be pre-
pared immediately before use. Can be used for processing of 50 beehives.
Residues of the working fuid should not be stored in the working system of the de-
vice, and in case of repeated use, it is recommended to flter it.