Advertisement
Available languages
Available languages
appliance yourself/ as inappropriate use may result in considerable
hazards for the
user" In
the event that the power cable is damaged,
please contact your specialist dealer / customer service.
.
Make sure you keep your hands away from the operating
blades while you work.
.
use the haircutting tool for cutting hair
only,
.
only
use the
accessories
provided,
.
Do not subject the appliance to extreme ternperatures below
0
oC
/
32 "F or above 40
oC
l
104
oF.
Avoid exposing it to direct
sunlig ht.
.
The appliance complies with the Eu directives
concerning
electron ic
com pati
bi
l
ity.
To
connect
Connect the cable to the mains end switch on the appliance using the
ON/OFF button (see Fig.
1).
After use, please switch off the appliance
and disconnect it from the mains socket"
Cutti
ng-
length
setti ngs
Without the attachment combs, the standard cutting length
is
about 0.90 mm, The cutting length can be regulated seamlessly
between about 0,90 mm and 2.00 mm by pressing
or
releasing
the adjustment lever on the left-hand side (see Fig. 2, A),
With
the help
of
the locking leveron the right-hand side (see
Fig.2,
B)
it is possible to set different cutting lengths (0,9
mm
-
2,CI
mm)
by pressing the ieft-hand adjustment lever at the same time. The
set cutting length can be released again with a forward
motion
of
the right-hand locking
!ever.
Width of the large clipper blade: 45,0
mm
Comb attachments for increasin9 the
cutting length
It is possible to extend the cutting length range by 3.0
mm, 6,0
mm, 10,0 mm, 13,0 mm respectively with the help of the
6 comb
attachments (the cutting lengths are indicated
on the sides of the
combs), Push the comb attachments as far as they will 90 over
the front edge of the clipper blades (see Fig. 3) and simply
pull
them off again after
use.
Advertisement
