Basic Operation - NESA NSM-7300AHD Operating Instructions Manual

. Basic Operation

1
2
-
Connection of
Hold the cable , align the side of jack
marked with on the female -pin
connector with the male -pin connector
marked with then firmly plug together.
1 White 4 pin male for Camera 1.
2 Blue 4 pin male for Camera 2.
Brown 4 pin male for Camera 3.
3
4 Single red wire to power wire of DC : 10-32V.
5 Single black wire to GND.
Single white wire to positive power wire of the Camera 1.
6
Single blue wire to positive power wire of Camera 2.
7
8
Single brown wire to positive power wire of Camera 3 .
Black 13 pin male
Black 13 pin female
Removing the Monitor:
Insert the detaching piece as indicated by the white
arrow. Press in and lift up, the monitor will be released
from the flush mount.
Remove the monitor.
9
White 4 pin male for Camera 1.
Blue 4 pin male for Camera 2.
Brown 4 pin male for Camera 3.
Single red wire to positive power supply of DC:10-32V.
Single black wire to GND.
Single white wire to positive power wire of Camera 1.
Single blue wire to positive power wire of Camera 2.
Single brown wire to positive power wire of Camera 3.
Flush mount
Detaching piece
Color LCD screen
Camera