Whirlpool MH7130XE Use And Care Manual page 16

NOTES:
l
If you have entered
all settings for a
function but do not touch START/ENTER
within 5 seconds, the Start indicator light
will flash.
l
If
you
open
the door while the oven is on
and then shut the door, the Start indicator
light will flash. Touch START/ENTER to
restart the oven.
l
If
you
choose
a function but do not press
another Command Pad within 1 minute, the
display returns to the time of day and you
have to start over.
Audible signals
Audible signals are available to guide you
when setting and using your oven:
l
A programming tone will sound
each
time you touch a pad.
l
One long tone
signals the end of a Minute
Timer countdown.
l
Four tones
signal the end of a cooking
cycle.
l
Two tones
sound once every minute after
an End-of-Cooking signal as a reminder if
food has not been removed from oven.
l
Three tones
sound if you have made an
incorrect entry.
To disable all audible signals:
*Touch and hold
Number Pad 1 for 4
seconds to disable all programming tones.
To turn all signals back on:
Repeat step under "To disable all audible
signals" above.
NOTE:
Three tones, followed by two tones,
will sound when audible signals are turned
on or off. The three tones will be omitted if
all tones are disabled.
16