Advertisement
Quick Links
Treadmill
Please read and retain these instructions for future reference
Control Panel
Adjustment Screw
Securing knob
TECHNICAL DETAILS:
POWER DETAILS:
POWER FREQUENCY:
WATTAGE:
Max Load:
Complies with EN 957-6:2010+A1:2014 Stationary training equipment. Treadmills, additional
specific safety requirements and test methods.
ACCESSORIES:
This treadmill is supplied flat-packed, so some minor home assembly is required.
Assembly instructions are provided. Please see the following details. Folds down for easy storage.
Note: The running board and running belt have been treated with anti-static lubricants. It is
recommended users use an anti-static silicon lubricant (not included) at least every 3 months.
10811
Emergency Stop Switch
Handrail support
220-240V a.c.
50-60Hz
500W
110kg
1 x M6 inner hex spanner
1x M16 inner hex screw = adjustment screw
1x M12 inner hex screw = security knob
1x Emergency stop switch
FOR DOMESTIC USE ONLY
Instructions for Use
v004
Handrails
Running belt
: 04/09/20
Side Rails
Advertisement
Summary of Contents for Zeus 10811
- Page 1 Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 Control Panel Emergency Stop Switch Adjustment Screw Handrails Handrail support Running belt Securing knob Side Rails TECHNICAL DETAILS: POWER DETAILS: 220-240V a.c. POWER FREQUENCY:...
- Page 2 Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 ASSEMBLY: Open the package and take out the treadmill. Photo 1 Pull the adjustment screw from the upper handrail support(photo 2), fold up the handrail support...
- Page 3 Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 Photo 5a Photo 5b The control panel is fitted with a screw which can be losened or tightened with the hexagonal wrench provided. (photo 5 a and b) Put the emergency switch onto the control panel with the magnet(photo 6).
-
Page 4: Operation
Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 Control Panel Instructions: 1. Plug into the power supply to enter Standby. The buzzer will sound and display will show “===”. Click the “On/Off” button (run/stop) to switch machine on or off. -
Page 5: Maintenance
Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 letting go of them. To stop the treadmill: - using the control panel decrease the speed until it stops - hit the emergency stop switch. - Page 6 Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 the way we run. For adjusting the running belt with a right bias, turn the bolt in a clockwise direction to ½ laps, and then the left side of the adjustment bolt along counter-clockwise rotating ½...
-
Page 7: Troubleshooting
Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 TROUBLESHOOTING: Fault Cause Solution Does not Function Lack of Power. Check fuse in plug. Replace fuse if blown. Check plug is connected to mains socket and power is switched ON. - Page 8 Treadmill Instructions for Use 10811 Please read and retain these instructions for future reference v004 : 04/09/20 Code & Symbol Type of Plastic Polypropylene Microwaveable food containers, CD’s, crisp packets, various flexible Commonly used for yoghurt pots, butter tubs, packaging, baby bottles, sunglass...