Lights - Whirlpool MH6700XW-1 Use & Care Manual

Replacing the Cooktop and Oven Lights
Fire Hazard
Use only candelabra base bulbs, 30-watt maxlmum. Failure to do so
could result In flre.
The Cooktop light:
1,
.
Electrical Shock Hazard
Turn off power at maln
power supply betore re-
placlng the light bulb.
Fallu~~ to do so could re-
sult In electrical shock.
The Oven light:
Electrical Shock Hazard
Turn off power at maln
power supply beiore re-
placlng the light bulb.
Failure to do so could re-
sult In electrlcal shock.
5.
Lift
up the bulb holder.
2. Remove the bulb cover
mounting screws.
3. We recommend replacing
bulb(s) wlth candelabra-
base 30-watt bulb(s) avail-
able from your authorized
WhirlpoolSM service com-
pany (Part No. 4158432).
2. Remove the vent cover
mounting screws.
8. Tip the cover forward, then
lifl out to remove.
4. Remove bulb holder
mounting screw.
6.
We recommend replacing
bulb with candelabra-base
30-watt bulb available from
your authorized WhirlpoolSM
service company (Part No.
4158432).
7. Replace the bulb holder
and mounting screw.
8.
Slide the top of the vent
cover Into place. Push the
bottom until it snaps into
place. Replace the mount-
ing screws. Turn the power
back on at main power
SUPPlY.
29