Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ASO Safety Solutions SENTIR edge 25.45 Series
Summary of Contents for ASO Safety Solutions SENTIR edge 25.45 Series
- Page 1 25.45 25.45 Product Information US Edition ASO Inc. All Rights Reserved...
-
Page 2: Specifications
PRODUCT INFORMATION Specifi cations SENTIR edge SENTIR edge SENTIR edge 25.45 CT 25.45 TTLa 25.45 TTLL SENTIR edge 25.45 Ts T La Sealing lip La: Single-sided ASO-Safety (outwards) contact edges LL: Double-sided (outwards) Profi le width Material Profi le height Base shape T: T-base Ts: T-base small... - Page 3 Specifi cations SENTIR edge SENTIR edge SENTIR edge 25.45 CT 25.45 T(s*)TLa 25.45 FTLa (17*) * All shown variants are also availiable with smaller base shape „Ts“. Max. Lieferlänge 25 m Max. delivery length Dimensionen 25 mm W x 45 mm H Dimensions EN ISO 13856-2 Zertifi...
-
Page 4: Technical Data
PRODUCT INFORMATION Technical data General data Type SENTIR edge 25.45 CT Article No. 1502-4880 Material Material hardness 68 Shore A Delivery length 25 m Weight kg/m 0,61 Enclosure IP 65 (IP 68 on request) Switching Cycles > 30.000 (UL 325) Switching Angle 2 x 45°... - Page 5 Technical data General data Type SENTIR edge 25.45 TT (25.45 TsT) Article No. 1502-0440 (1502-0910) Material Material hardness 68 Shore A Delivery length 25 m Weight kg/m 0,44 Enclosure IP 65 (IP 68 on request) Switching Cycles > 30.000 (UL 325) Switching Angle 2 x 45°...
- Page 6 PRODUCT INFORMATION Technical data General data Type SENTIR edge 25.45 TTLa (25.45 TsTLa) Article No. 1502-0560 (1502-0950) Material Material hardness 68 Shore A Delivery length 25 m Weight kg/m 0,47 Enclosure IP 65 (IP 68 on request) Switching Cycles > 30.000 (UL 325) Switching Angle 2 x 45°...
- Page 7 Technical data General data Type SENTIR edge 25.45 TTLL (25.45 TsTLL) Article No. 1502-0550 (1502-0920) Material Material hardness 68 Shore A Delivery length 25 m Weight kg/m 0,50 Enclosure IP 65 (IP 68 on request) Switching Cycles > 30.000 (UL 325) Switching Angle 2 x 45°...
- Page 8 PRODUCT INFORMATION Technical data Material properties General Chemical resistance Tear strength Water (dist.) Ultimate tensile strength Dilutes acid Rebound elasticity at 20 °C Dilutes base Resistance against permanent deformation Not oxidizing acids Abrasion Oxidizing acids Elongation @ Tear ASTM-oil No. 3 Cold fl...
- Page 9 Assembly system The KS 4 Plug´N´Sense System Fixation clip Contact plug KS 4 Aluminium fi xation profi le with sealing End cap Lock cap Double chamber profi le with integrated switching chamber KS 4 W or L XX,Xm - 25.45-Set KS 4 plug with lock cap (resistor 8.2 kOhm or XX,X m cable) Fixation clip...
- Page 10 PRODUCT INFORMATION Assembly instructions Safety contact edges may only be assembled and installed by authorized personnel! Read all instructions fi rst before installing / setting up the Product! Do not drink any alcohol or take any drugs before or during the setup of the Product and follow the safety instructions carefully.
-
Page 11: Mounting Instructions
Mounting instructions Safety contact edges may only be assembled and installed by authorized personnel! Read all instructions fi rst before installing / setting up the Product! Do not drink any alcohol or take any drugs before or during the setup of the Product and follow the safety instructions carefully. -
Page 12: Warnings And Disclaimers
PRODUCT INFORMATION Warnings and disclaimers 1. Preparations / set up All SENTIR edges are inspected and tested before being shipped to ensure against damage. If the shipping container appears to be damaged, please notify the supplier immediately. WARNING: Do not bend or fold as damage may occur. 2. - Page 13 Warnings and disclaimers Thorough examination and test: To avoid the risk of crushing, Safety gloves must be worn! Installa� on and electrical work must be performed by authorized electricians. Recommended twice yearly or after damage. To be done by a person trained or qualifi ed in electrical and mechanical enginee- ring.
- Page 14 PRODUCT INFORMATION Warnings and disclaimers 5. Disclaimer: In no event will the manufacturer be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. If applied incorrectly, serious injury or death can occur. The user must observe the safety instructions in this operating instructions manual, the country-specifi...
-
Page 15: Declaration Of Conformity
Declaration of conformity... - Page 16 PRODUCT INFORMATION Notes...
- Page 17 Notes...
- Page 18 Headquarter Europe Headquarter USA ASO GmbH ASO Safety Solutions Inc. Hansastraße 52 300 Roundhill Drive, Unit 6 59557 Lippstadt Rockaway. NJ 07866 Tel +49 2941 9793-0 Phone +1 973 7844994 Fax +49 2941 9793-299 +1 973 5861590 www.asosafety.de www.asosafety.com aso-eu@asosafety.com sales-us@asosafety.com...
Need help?
Do you have a question about the SENTIR edge 25.45 Series and is the answer not in the manual?
Questions and answers