Storage And Transportation; Maintenance Instructions - WEITKOWITZ APW30 Instruction Manual

L
Warning: during tool operation, the typical A weighted sound pressure level may
exceed 70 dB (A)!
L
Warning:
the total exposure value for hand-arm vibration is lower than 2.5 m/s²!
L
Warning:
the tool must only be operated using original Weitkowitz battery units!
L
Warning:
remove the battery if the tool is not used for long periods of time!
A
Warning:
do not use the device in areas where there is danger of explosion!
L
Warning:
if an oil leak occurs, send the crimping tool to an Weitkowitz service centre!
A
Warning:
do not use the crimping tool in driving rain or under water!
L
Warning: hydraulic oils contaminate ground water. Oil spillage and improper
disposal are liable to prosecution (in accordance with environmental protection
regulations)!

5. Storage and transportation

We recommend cleaning the APW30 crimping tool thoroughly after use in order to
protect it from damage. To store the tool, use exclusively the carry case and make sure
it is closed properly. The crimping tool must at all times be transported in the carry case
provided, which must be closed, and must be used only by persons in good physical
condition.

6. Maintenance instructions

After every use, clean the crimping tool and store in a dry place. The battery and battery
charger must be protected from moisture and foreign bodies. As a rule, the device
does not require maintenance. After 3 years or 20,000 work cycles, the crimping tool
must be sent to the maintenance centre in order to guarantee correct working order
and increase its working life. The customer is not authorised to carry out maintenance.
Repairs to the tool must be carried out exclusively by qualified technicians using only
original spare parts, so as not to compromise the safety of the device
22
APW30