Appliance Description - Carbest 94348 Instruction Manual

DISPOSAL
CAUTION
Follow local regulations regarding the disposal of materials. The appliance should be disposed
of according to Regulation 2002/96/EC-WEEE (Waste Electrical and Electronic Equipment).
In case of queries, contact the municipal authorities responsible for waste disposal in your
area.

5. APPLIANCE DESCRIPTION

Shiatsu massage pillow (front)
Hand switch
6. START-UP
• Fasten the protective cover to the surface of the Shiatsu seat cover with the Velcro straps. It is
also possible to massage without the protective cover; this is generally found to be "harder".
• Position the seat cover upright on a suitable seating arrangement with seating surface and
backrest (chair, sofa, or similar). Ensure that the seat cover is supported over its entire area
and has a sufficiently high backrest.
• Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
• Connect the power supply unit and the seat cover with the plug connector.
• Connect the device to the mains by plugging the plug into the socket.
12
1 Protective cover
2 Neck pillow
3 Four massage heads
4 Fastening straps
5 Connecting coupling
6 Power supply unit with plug connector and
power cable
7 Hand switch
8 Storage bag
9 VIBRATION
1 DEMO button
2 Shiatsu button (full \upper\lower\back)
3 Rolling button (full \upper\lower\back)
5 WIDTH button (Massage width )
4 SPOT buttons (localised massage)
6 VIBRATION button (vibration massage )
7 HEAT button (heat massage)
8 Power button