Page 1
Contents Introduction ......................3 RIDER Technical description ..................Adjusting your Rider ................... The alternative methods of emergency parachute connection ......Speed systém ....................Towing ........................ 10 Tandem flying ..................... Harness check before take off ................Maintenance and repairs ..................10...
Page 2
The basic setting of the angle between your back and the vertical axis. We congratulate you on your purchase of a new Rider harness. You have chosen a state Please devote sufficient time to setting the harness correctly. Preferably hang it on a of the art product which is one of most comfortable paragliding harnesses available on simulator or similar, and check it, spending long enough to simulate long periods of flight.
Page 3
The rescue canopy must be inserted in the shoulders. original Rider inner container with attached handle and pins. You must not use an inner When correctly adjusted you feel only light pressure on both back and shoulder. If container from other manufacturers.
Page 4
See picture "Connection 3". Assembly in outer container 1. Place the Rider inner container with rescue canopy onto the outer container as shown in the picture below. The rescue canopy bridle leads to the tunnel on the right-hand side.
Page 5
Towing The Rider harness is excellent for towing. The release system must be connected to the same carabineers attaching the paraglider risers! To attach the release system properly, insert the release bridle in such a way that the release itself is in front of the risers, in the direction of flight.
Page 6
5,1 kg Back protection: Styrofoam protection; 12 cm with plastic plate penetration protection Rescue system: Integrated container (envelope system) under the seat plate with a lateral handle. MAC PARA TECHNOLOGY Ltd. 1. máje 823 Rožnov pod Radhoštìm 756 61 CZECH REPUBLIC tel: +420 571 842 235 tel./fax: +420 571 842 332...
Need help?
Do you have a question about the RIDER and is the answer not in the manual?
Questions and answers