platypus PP10LV Instruction Manual

platypus PP10LV Instruction Manual

Submersible pumps

Advertisement

Quick Links

INSTRUCTION MANUAL
2018 v1.0
MODELS
PP10LV
PP25LV
PP40LV
PP12
PP25
PP40
PP65
PP85
PP110
PP30
PP60

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PP10LV and is the answer not in the manual?

Questions and answers

Summary of Contents for platypus PP10LV

  • Page 1 INSTRUCTION MANUAL 2018 v1.0 MODELS PP10LV PP25LV PP40LV PP12 PP25 PP40 PP65 PP85 PP110 PP30 PP60 • • • • • • • • • •...
  • Page 2 CONGRATULATIONS ON YOUR PURCHASE OF THIS PRODUCT BY PLATYPUS. TECHNICAL SPECIFICATIONS DESCRIPTION PP10LV PP25LV PP40LV PP12 PP25 PP40 PP65 PP85 PP110 PP30 PP60 MAXIMUM FLOW (L/H) 1000 2400 3900 1200 2400 3900 6500 8500 11000 3000 6000 MAXIMUM HEAD (M) 1.95...
  • Page 3 WATER FEATURE. or damaged it should be replaced (available from your local dealer). failure to do so may cause serious • Platypus pumps are suitable for use in many different damage to the pump. applications including fountains, water features, small ponds and hydroponics.
  • Page 4 9. Daisy Nozzle 10. Pump Adaptors 11. Inlet Adaptor* 12. Flow Controller with Waterfall Outlet 13. Flow Controller Adaptor PP10LV | PP25LV | PP40LV 1. Front Cover 2. Biosponge 3. Intake Screen 4. Impellor Cover 5. Impellor 6. Motor Body 7.
  • Page 5 PP30 | PP60 1. Front Suction Screen* 2. Stepped Hosetail 3. Impellor Housing 4. Impellor 5. Motor Body *This pump requires no prefilter sponge PP65 | PP85 | PP110 1. Outer Filter Screen 2. Inner Filter Screen 3. Impellor Cover 4.
  • Page 6 TROUBLESHOOTING PROBLEM REASON SOLUTION Water Pump Not Check that the plug is connected No Power Working and turned on Sponges and filter media Clean the sponges and filters blocked with sludge Impellor is blocked with Clean the Impellor as per sludge or limescale the instructions Submerse the equipment underwater...
  • Page 7 • Always use a properly grounded power supply that is return the faulty appliance for any warranty claim, to connected to an RCD with a rated residual operating Platypus. current not exceeding 30mA. As per AS/NZS 3350.2.41:1997. • For any warranty to be valid, an original proof of purchase must be provided.
  • Page 8 PO BOX 1042, KELMSCOTT WA 6997 TEL: 08 6244 4342 EMAIL: sales@viulighting.com...

This manual is also suitable for:

Pp25lvPp40lvPp12Pp25Pp40Pp65 ... Show all

Table of Contents