NewMar London Aire 2021 Owner's Manual page 88

Lighting Operation via KIB LCD Touchscreen
This article provides brief operating instructions for a KIB LCD touchscreen.
Operation
Touch the inactive (blank) screen to activate and
display the Lighting screen. Once the panel becomes
inactive and times out, it will default back to the blank
screen. Touch the Home icon to reveal the Home Menu
page, which may include buttons for lighting, shades,
fans, systems, or display brightness controls, as well as
as icon in the upper right corner for More Information
(i). Once a button is touched, it will turn red, indicating
the circuit is active. The buttons are gray while the
circuit is inactive.
Lighting
Once a function is selected, such as Lighting, the
screen will display additional buttons pertaining to
the area in which the panel is mounted. The available
buttons will vary by coach model and floorplan, as well
as installed options. Potential buttons may include, but
are not limited to:
•
CEILING LTS
•
BATHROOM LTS
•
BEDROOM LTS
•
WALL LTS
•
MIRROR LTS
The All Lights On/O buttons toggle all lights on and o
in the coach at once.
RECEPTACLES AND ACCESSORY
CHARGERS
Newmar coaches are framed 16 inches on center, allowing the best placement of outlets, switches and other components.
120 Volt Outlets
This article provides information about the 120 Volt outlets located throughout the interior of the coach.
Several 120 volt receptacles are located
throughout the interior of the unit. These
receptacles require three-pin plugs that
provide proper grounding to protect you
from electrical shock. The breaker for the
outlets are usually located in the breaker
box. If the breakers are on the inverted
circuitry, they will be located in the
subpanel near the main breaker box.
© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
•
VANITY LTS
•
ACCENT LTS
•
COURTESY LTS
•
ALL LIGHTS ON
•
ALL LIGHTS OFF
Touch the ON button to turn on the selected light
circuit. Touch the OFF button to turn o the selected
circuit. On lighting circuits with dimming capability, drag
the slider to adjust the brightness of the selected light
circuit.
IMPORTANT
!
Do not use an adapter, cheater, or extension cord
that breaks the continuity of the ground circuit to the
ground pin. Never remove the ground pin from a plug
in order to connect it to a two-pronged ungrounded
outlet.
E LECTRI CA L
83