Orbit Orion TI-30XS MultiView Quick Start Manual

Orion TI-30XS MultiView
Quick-Start Guide
The Orion TI-30XS MultiView is the world's first multi-line talking scientific
calculator and is based on the popular TI-30XS MultiView Calculator from Texas
Instruments. The functionality and operation of the Orion TI-30XS are identical in
all respects to the standard TI-30XS calculator. The only differences are
additional controls, jacks, speakers, and software for making the user interface
fully accessible.
This guide provides basic instructions for using the Orion TI-30XS MultiView
Talking Scientific Calculator. For more complete instructions and information,
refer to the User Guide online at https://www.orbitresearch.com/product/orion-ti-
30xs/.

In the Box

The following items are included in the package: Orion TI-30XS MultiView
Talking Scientific Calculator, charger, USB Cable (USB-A to Micro-B), stereo
earphones, a sliding protective hard cover, a hard top-cover and a printed Quick-
Start Guide. Contact your distributor if anything is missing or damaged.

Orientation of the Device

Position the Orion TI-30XS so that the keys are facing up and the ports are at the
top. This is the normal operating position for the unit. The port at the top left of
the calculator is the earphone jack and to its right is the Micro-B USB port, which
is used to charge and upgrade the device.
There are three keys on the top section of the calculator, above the LCD screen.
The key on the left is the Access key, the middle key is the Silence/Learn key
and the key on the right is the Repeat key. The TI-30XS calculator keys are on
the bottom half of the calculator. There are 41 keys arranged in five rows and
nine columns with a four-key directional pad in the upper-right corner. The On
key is on the bottom left corner and has a raised outline on the bottom-left corner
of the key.

Charging the Device

We recommend charging the device fully before or during first use. To charge the
built-in user-replaceable battery, plug the small end of the supplied USB cable
into the Micro-B USB port and insert the other end into the supplied charger.