Page 1
ITEM #0840737 OUTDOOR KITCHEN QUARTER ROUND TABLE Master Forge & M Design® is a registered trademark of LF, LLC. MODEL #BG179EL All rights reserved. Français p.16 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-963-0211, 8:00 a.m.
HARDWARE CONTENTS M6X16 mm M6X30 mm M6 Washer M6 Nut Screw Screw Qty.2 Qty.2 Qty.4 Qty.4 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
I-Shape L-Shape O-Shape U-Shape This product works in combination with these other Master Forge items: A - #0839966 Modular 5 Burner Grill B - #0840736 Modular Refrigerator C - #0839967 Modular Sink and Side Burner E - #0840737 Modular Quarter Table...
ASSEMBLY INSTRUCTIONS I-Shape Configuration: Install this table unit to both sides. 1. When installing the table to the right side of the outdoor kitchen configuration, install the leg at the position shown. NOTE: The quarter round side should be facing the front. Leg installed under here 2.
Page 7
ASSEMBLY INSTRUCTIONS 4. Your table unit is now assembled to the right side. When installing the table to the left side of the outdoor kitchen configuration, install the leg at the position shown. NOTE: The quarter round side should be facing the front.
Page 8
ASSEMBLY INSTRUCTIONS 7. Use Phillips screwdriver to screw M6x30 screws (BB) to the hole on left side panel of your outdoor kitchen, leaving the screw heads protruding approximately 2/3 above the panel. Insert the hardy holes in side panel of table over the protruding screws;...
Page 9
ASSEMBLY INSTRUCTIONS 10. Use 4 M6x16 screws (AA) to attach the leg (B) under the quarter round table top (A). Insert the pipe plug (C) to the bottom of leg (B). Hardware Used M6x16 Screw Phillips Screwdriver 11. Use Phillips screwdriver to screw 4 M6x30 screws (BB) to the hole on each side panel of your outdoor kitchen, leaving the screw heads protruding approximately 2/3...
Page 10
ASSEMBLY INSTRUCTIONS 13. Three table units can be connected together with Item #0840736. When installing in this configuration, attach the legs in the positions as shown. Leg installed under here 14. Use 4 M6x16 screws (AA) to attach the leg (B) under the quarter round table top (A). Insert the pipe plug (C) to the bottom of leg (B).
Page 11
ASSEMBLY INSTRUCTIONS 16. Attach table B to assembled table A using 2 M6x30 screw (BB), M6 washers (CC) and M6 nuts (DD) with Phillips screwdriver. Note: The screws should be inserted to the round hole instead of hardy hole. Hardware Used M6x30 Screw M6 Washer M6 Nut...
Page 12
ASSEMBLY INSTRUCTIONS 18. Connect table B and C using 2 M6x30 screws (BB), M6 washers (CC) and M6 nuts (DD) with Phillips screwdriver. Note: The screws should be inserted to the round hole instead of hardy hole. Hardware Used M6x30 Screw M6 Washer M6 Nut Phillips...
ASSEMBLY INSTRUCTIONS U-Shape Configuration: 21. Following the same instructions provided in the previous sections, your outdoor kitchen can be constructed in the U-shape configuration. Install the tables and legs in the correct positions, as shown. OPERATING INSTRUCTIONS 1. This table unit can carry approximately 22 lbs. (10 kg). 2.
CARE AND MAINTENANCE Cleaning Your Unit • Wash the unit with warm water and mild liquid detergent. Rinse well and wipe dry with a clean, soft cloth. Moving Your Unit • Remove all stuff from the table top. • Remove the screws connected to your outdoor kitchen. •...
EXPLODED VIEW For replacement parts, call our customer service department at 1-800-963-0211, 8:00 a.m. – 8:00 p.m., EST, Monday - Friday. REPLACEMENT PARTS LIST PART DESCRIPTION QUANTITY Quarter Round Table Top Pipe Plug Hardware Pack Printed in China...
Need help?
Do you have a question about the BG179EL and is the answer not in the manual?
Questions and answers