Tape Operation; Using Headphones - Sylvania SRC124 User Manual

DECK CONTROL BUTTONS (#9)
STOP / EJECT KEY
FAST FORWARD KEY
& REWIND KEY
PLAY KEY
PAUSE KEY
RECORD KEY
PLAYBACK
 Put in a cassette tape with the side to play
facing out, and close the cassette door.
 Press the PLAY button to active playback
 Adjust the volume control to the desired level.
 Use the PAUSE button when you want to stop
playback temporarily.
 Press the STOP / EJECT button when finished.

USING HEADPHONES

Plug your headphones (not included) with 3.5 mm
diameter stereo plug, into the EARPHONE JACK
(#5) on the side of the unit for private listening. The
speaker on the unit will automatically disconnect
when headphone are plugged in.
RECORDING
You can record audio from various sound sources
using the built-in microphone, with the included
external microphone, or from an external audio
source through the AUX IN JACK (#4).
Note : The SRC124 is a mono player/recorder,
so only the left channel will be recorded
through the AUX JACK (#4).
1. Prepare the source
Built-in microphone –
Place the recorder within 2 to 3 feet of the
sound source.
External microphone –

TAPE OPERATION

Press to stop all deck operations. Press again to
open the cassette door.
Press to start rapid tape winding in either forward or
reverse direction. Press the STOP / EJECT key when
the cassette spools stop turning
Press to start playing tape
Press to stop the tape operation temporarily. Press
again to resume
Press to start tape recording.
E-5