Advertisement
First-time Operation
14
When the CPU temperature is high, the computer may not
start up to prevent overheating of the CPU. Wait until the
computer cools down, and then turn the power on again. If
the computer does not power on even after cooling down,
contact Panasonic Technical Support ( "OPERATING IN-
STRUCTIONS - Basic Guide").
Any changes from the default setting of the Setup Utility must
not be made until the First-time Operation is completed.
5
<For MUI OS model>
Select language and OS (32-bit or 64-bit)
CAUTION
Carefully choose your language because you cannot change it
later. If you set a wrong language, you need to reinstall Windows.
A Select language and OS (32-bit or 64-bit) on "Select OS"
screen and touch [OK].
The language setting will start by touching [OK] on the
confi rmation screen.
The language and OS setting will be completed in about
15 minutes.
B When termination screen is displayed, touch [OK] to turn
off the computer.
6
Setup Windows
Select language and click [Next].
Turn on the computer.
Follow the on-screen instructions.
The computer restarts several times. Do not touch the key-
board or touchpad, and wait until the drive indicator
turned off.
After the computer is turned on, the screen remains black
or unchanged for a while, but this is not a malfunction. Wait
for a moment until the Windows setup screen appears.
During setup of Windows, use the touchpad and clicking to
move the pointer and to click an item.
Setup of Windows will take approximately
5 minutes /
Go to the next step, confi rming each message on the dis-
play.
has
20 minutes.
Advertisement
