Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Command Light Shadow Series
Summary of Contents for Command Light Shadow Series
- Page 1 S h a d o w S e r i e s...
- Page 2 Shadow THANK YOU Please allow us to express a simple thank you for investing in a COMMAND LIGHT product. As a company we are dedicated to producing the very best and most versatile flood lighting package available. We take great pride in the quality of our work and hope that you will find many years of satisfaction from the use of this equipment.
- Page 3 USER GUIDE...
-
Page 4: Table Of Contents
Shadow Please take the time to read this manual before installing or operating the Shadow Save this guide for future reference. Contents Limited Warranty ............................5 Breakage or Damage During Shipment ............Error! Bookmark not defined. Product Safety Precautions ......................... 7 General Description and Specifications ..................... -
Page 5: Limited Warranty
COMMAND LIGHT warrants that the equipment is free from defects in materials and workmanship when used and operated for a period of five years. The responsibility of COMMAND LIGHT under this limited warranty is limited to the repair and replacement of any parts found defective. Parts must be returned to COMMAND LIGHT at 3842 Redman Drive, Ft Collins, Colorado 80524 with transportation charges prepaid (C.O.D. -
Page 6: Breakage Or Damage During Shipment
Shadow Warranty/Service COMMAND LIGHT products* come with a industry leading 5 year warranty against any defects in materials and workmanship when used and operated for a period of five years. If during this time period, you have any malfunctions not related to misuse, accident, neglect, or normal wear and tear, please take the following steps in order to have your light tower serviced under COMMAND LIGHT’s warranty. -
Page 7: Product Safety Precautions
• Do not use a Command Light Shadow that has been damaged or is not fully functional, including non-working indicator lamps. • Never hold any part of the Command Light Shadow with a hand or foot while it is in motion. -
Page 8: General Description And Specifications
Shadow General Description and Specifications The Shadow is designed to provide high intensity emergency scene lighting with quick precision. As with any electromechanical device, take precautionary steps to ensure safe operation. Model # Description Minimum Power Requirements SL428A 2 x 1000W 9 Amps, 240 VAC SL429A 2 x 1500W... -
Page 9: Installation
Verify all connected electrical components are able to handle the load for this light tower as listed in the Technical Specifications on page 15. If in doubt, contact Command Light at 1-800-797-7974 or info@commandlight.com. Installation Kit Included with the Shadow is an installation kit. - Page 10 Shadow Solder-less wire connector crimp tool Silicone based gasket sealer, RTV™ recommended...
-
Page 11: Installation Notes
USER GUIDE Installation Notes The Shadow weighs approximately 75 pounds. Use mechanical assistance such as a forklift or crane to lift the light into installation position. Use the provided fender washers under the mounting surface to distribute the weight load evenly. -
Page 12: Mounting
Shadow Mounting Place the provided spacers in the location of the light mounting holes. The spacers may be modified to conform to the contour of the mounting location. Remove any obstructions below the mounting surface such as headliners. Attach any necessary lifting attachments to the Shadow . -
Page 13: Electrical Wiring
USER GUIDE Electrical Wiring Please Note: Detailed internal wiring schematic for the light is found in the supplement pages found at the end of this document. Run the control wire from the control box holster to the Shadow Run the power wire from the breaker box or generator to the Shadow . -
Page 14: Maintenance
Shadow Maintenance Cleaning The Shadow is constructed with corrosion resistant aluminum and stainless steel fasteners. To further enhance corrosion resistance all exposed surfaces receive a powder coated paint finish. To assure years of trouble free service periodically clean all external surfaces with a mild detergent solution and a gentle spray of water. -
Page 15: Troubleshooting
USER GUIDE Troubleshooting Problem Possible Cause Solution Unit will not extend No power to the unit Check power input connections. Ensure 100 Amp input breaker has not been tripped. Incorrect installation Refer to installation instructions. Upper stage will not rotate Lower stage not raised Raise lower stage higher. -
Page 16: Technical Specifications - Standard Ac Model (Sl428A, Sl429A)
Shadow Technical Specifications – Standard AC Model (SL428A, SL429A) Description Dimensions (with strobe and ½” mounting spacers) – May vary by model and options: Height(Depth) Length Width Retracted 8” 54” 34” Extended 55” 56” 34” Recessed installation 10” 62” 40” Minimums Weight: 65 pounds... -
Page 17: Drawing
USER GUIDE Drawing... -
Page 18: Parts Lists - Exploded Views
Shadow Parts Lists - Exploded Views... - Page 19 USER GUIDE...
- Page 20 Shadow...
- Page 21 USER GUIDE...
- Page 22 Shadow...
-
Page 23: Wiring Schematics
USER GUIDE Wiring Schematics... - Page 24 Shadow...
- Page 25 USER GUIDE...
- Page 26 Shadow...
Need help?
Do you have a question about the Shadow Series and is the answer not in the manual?
Questions and answers