Advertisement
Quick Links
Safe Screen Assembly Instructions
Important
This product requires 2 people for assembly.
Before handling any of the panels please note that there are " D o Not Lift " stickers placed on
the long narrow tabs of each panel. During the handling and assembly process of your Safe
Screen please avoid placing any weight or leverage on this area of each panel. Otherwise,
damage may occur.
Step #1
Lay the back panel on the floor, using the provided foam blocks as spacers. If preferred, the
foam blocks can be temporarily applied using the peel and stick backing.
Apply foam blocks if desired
Flip panel over onto foam blocks
Advertisement
Summary of Contents for Spectrum Safe Screen
- Page 1 Safe Screen Assembly Instructions Important This product requires 2 people for assembly. Before handling any of the panels please note that there are “ D o Not Lift ” stickers placed on the long narrow tabs of each panel. During the handling and assembly process of your Safe Screen please avoid placing any weight or leverage on this area of each panel.
- Page 2 Ensure tabs and slots are aligned to avoid interference Your Safe Screen should now look like this Step #3 Repeat Step #2 with the remaining side panel. Your Safe Screen should now look like this...
- Page 3 Step #4 With two people, tip the unit up by lifting from the top. Position your Safe Screen into place. Remove all stickers and foam blocks. Your Safe Screen is now complete and ready to use.