NB ROLLER FLY SCREEN Installation & Operating Manual

For windows

Hide thumbs

Table Of Contents

ROLLER FLY SCREEN FOR WINDOWS

Thank you for purchasing this custom-made roller fly screen.

We use only the best quality materials to guarantee a long-lasting product.

Please read these instructions carefully before installing and operating your screen.

Incorrect installation may result in damage or injury.

Please use screws and plugs that are suitable to the fixing surface.

Alterations of the blind should be approved by the blind manufacturer.

If you have any queries or issues installing your blinds, please contact us

PARTS LIST

•

1 x Spring Loaded cassette unit incorporating mesh and hem bar with handles.

•

Cassette brackets – top fix or face fix (depending on your selection)

•

2 x Side channels

•

10mm cover caps for face fixed side guide channels.

•

1 x L-shaped profile – if selected.

•

1 x black plastic pile opener Tool

•

*Screws and plugs

*The screws and plugs provided are European style hex headed screws. These are provided by the

system supplier, so we include them. We recommend selecting your own screws and plugs suitable

for your fixing surface and tooling.

CLOSURE METHODS

There are two methods of latching the retractable screen closed.

1. Using two small internal locks inserted in the bottom of each side guide. This is the normal

situation for screens which are Inset Fixed into a reveal.

2. Using a length of L-shaped aluminium profile, fitted underneath the bottom of the side

channels. This is suggested for Face Fix situations, where there is no bottom sill to seal

against.

INSTALLATION & OPERATING GUIDANCE

THANK YOU!

by emailing customer.services@newblinds.co.uk

Table of Contents

Need help?

Do you have a question about the ROLLER FLY SCREEN and is the answer not in the manual?

Questions and answers

Summary of Contents for NB ROLLER FLY SCREEN

Page 1 ROLLER FLY SCREEN FOR WINDOWS INSTALLATION & OPERATING GUIDANCE THANK YOU! Thank you for purchasing this custom-made roller fly screen. We use only the best quality materials to guarantee a long-lasting product. Please read these instructions carefully before installing and operating your screen.
Page 2 INSTRUCTIONS FOR RECESS FIX INSTALLATION: 1) Drill, plug and screw the clip fix bracket in the centre of the opening reveal (wider screens may be provided with 2 clip ). If the screen is not very wide, no clip is necessary. 2) Clip the Cassette into the bracket, by locating the back edge and snapping into place.
Page 3 removing the Guide in order to insert a screw plug into the drilled hole, depending on the composition of the reveal walls. Fix both Guides in place. 8) Using the handles on the sliding bar, pull the screen from the Cassette to be sure of un-impeded travel 9) When closing the screen, simply pull the screen down to the sill rotate the handle bar, top edge towards you, latching it under the internal locks in the side guide rails to secure it,...
Page 4 INSTRUCTIONS FOR FACE FIX INSTALLATION: 1) Slide the Angle Bracket (L) on the top of the Cassette (A) and locate centrally. Wider screens may be supplied with 2 or more. 2) Mark the preferred fixing position on the fixing surface and drill and plug ready to screw the bracket in place.
Page 5 channels into place. 9) Push Cover Caps over the 10mm holes in the face of the Guides. 10) Slide the L-shape Profile (if applicable) into place across bottom of the Guides rails, and mark position(s) for fixing. 11) Drill, plug and screw the L-shaped profile in place. 12) Using the handles on the sliding bar, pull the screen from the Cassette to be sure of un-impeded travel 13) When closing the screen, simply pull the screen down to the sill (or L-Profile), rotate the handle...
Page 6 RETENSIONING INSTRUCTIONS If you feel you need more or less tension in your cassette, you may carefully follow the instructions below to adjust tension. 1) Protect your hands with some hard-wearing gloves. 2) Lay the cassette down (side channels removed) in front of you with the sliding bar closest. The side of the cassette with the spring is the left hand.
Page 7 DOs AND DON’Ts Whilst the systems are relatively maintenance-free if used correctly, we cannot account for damage caused when the screen is used incorrectly or is abused. The following tips of DOs and DON’Ts, if adhered to should ensure that your Retractable Insect Screen gives the user a long life of protection: •...