Page 1 Butterfly iQ Vet™ Ultrasound System User Manual...
Page 2 Part Number: 950-20013-00 Print Date: October 2019 Revision: A...
Page 3 Notice Butterfly Network, Inc. (BNI), shall not be liable for errors contained herein or for incremental or consequential damages in connection with the furnishing, performance, or use of this material. Proprietary Information This document contains proprietary information, which is protected by copyright.
Page 4 Butterfly iQ Vet™ User Manual...
Page 5: Table Of Contents
Butterfly iQ Vet™ Safety ........
Page 6 Uploading a Study ..............9-1 Contents 1-2 Butterfly iQ Vet™ User Manual...
Page 7 Contacting Butterfly Support ............13-1 Contents 1-3 Butterfly iQ Vet™ User Manual...
Page 8 Notes................15-4 Contents 1-4 Butterfly iQ Vet™ User Manual...
Page 9: Chapter 1: Introduction
This chapter provides an introduction to the Butterfly iQ Vet™ Ultrasound System. Overview Butterfly iQ Vet™ ultrasound is designed to be easy to use, portable, and battery powered. Its commercial off-the-shelf mobile platform (device) provides a simple interface for the user.
Page 10: Indications For Use
Contraindications for Use Butterfly iQ Vet™ should not be used for ophthalmic applications. Training In order to safely and effectively operate Butterfly iQ Vet™, the user shall meet the following: • Training as required by local, state, provincial, and national regulations •...
Page 11: Chapter 2: Safety Information
Chapter 2 Safety Information This chapter provides important safety information for using Butterfly iQ Vet™ and includes a list of warning and caution messages. This user manual is accessible from the Butterfly iQ™ App and through the website (www.butterflynetwork.com). For more information, see “Butterfly iQ™...
Page 12: Ultrasound Risks
The Butterfly iQ Vet™ is intended for use by competent users capable of interpreting image quality, diagnosis, and clinical utility of the system. • Do not use Butterfly iQ Vet™ until the materials present in this manual have been reviewed and fully understood. •...
Page 13: Basic Safety/Usage Environment
Butterfly iQ Vet™ has not been evaluated or approved for use in hazardous locations as defined in the National Electric Code standard. In compliance with IEC classification, the Butterfly iQ Vet™ is not to be used in the presence of flammable substances/air mixtures.
Page 14: Electrical Safety
Doing so may cause injury to the patient or operator. • Do not immerse probe beyond specified levels. Immersion beyond specified levels may result in electrical shock. Safety Information Butterfly iQ Vet™ User Manual...
Page 15: Defibrillation Safety
Improper maintenance may cause Butterfly iQ Vet™ not to function. Maintain the equipment only as described in the maintenance section. • Do not sterilize or autoclave the Butterfly iQ Vet™ or its accessories. Safety Information Butterfly iQ Vet™ User Manual...
Page 16: Biological Safety
Use of damaged equipment or accessories may cause the device to perform improperly and/or result in injury to the patient or operator. • Do not use, connect, or operate the Butterfly iQ Vet™ with non-approved or non-specified equipment or accessories. Doing so may result in injury to the patient or operator.
Page 17 • Follow your institution’s personal protective equipment (PPE) and infection control procedures (e.g. eye, respiratory, and hand protection) when operating, cleaning, or disinfecting the device. Safety Information Butterfly iQ Vet™ User Manual...
Page 18 Operator Safety Safety Information Butterfly iQ Vet™ User Manual...
Page 19: Chapter 3: System Overview
Chapter 3 System Overview This chapter provides an overview of Butterfly iQ Vet™. It includes information about its features, the components that are included in the system, requirements necessary to download, install, and use the Butterfly iQ™ App, and an overview of the user interface.
Page 20: Probe Types
Overview Probe Types Butterfly iQ Vet™ provides a single probe that is capable of performing all indicated clinical applications. Patient Data Protection CAUTION! It is required that you protect patient data by encrypting your mobile device with a password or passcode. You cannot use the Butterfly iQ™ App if your mobile device does not have a passcode enabled and configured.
Page 21: System Components
System Components System Components The probe and probe charger are included with your Butterfly iQ Vet™. Before getting started, identify each component and ensure that your package is complete. WARNING! Upon receiving your Butterfly iQ Vet™, carefully inspect the probe. Always inspect the probe before and after cleaning, disinfection, or use.
Page 22: Probe
System Components Probe The Butterfly iQ Vet™ probe is only for use with the Butterfly iQ™ App. Do not attempt to connect the probe to other ultrasound systems. Figure 3-1 shows the parts of the probe and Table 3-1 lists and describes the parts.
Page 23: Probe Battery Charger
Item Description Charging Pad Charging Cable Wall Adapter For instructions on charging the probe, see “Charging the Probe” on page 4-6. For details on the specifications, see “Probe Battery Charger” on page 14-3. System Overview Butterfly iQ Vet™ User Manual...
Page 24: Overview Of User Interface
This section provides information about the imaging display presented in the Butterfly iQ™ App user interface. Figure 3-3 shows an example of the imaging display and Table 3-3 lists and describes the items on the display. Figure 3-3 Imaging Display 3 4 5 System Overview Butterfly iQ Vet™ User Manual...
Page 25 Capture Reel. The number in the icon indicates the number of images and clips that are currently in the Capture Reel. Probe orientation marker Image display area Ruler. Provides imaging depth in centimeters. When the image is zoomed, the ruler adjusts accordingly. Presets selection System Overview Butterfly iQ Vet™ User Manual...
Page 26 Overview of User Interface Table 3-3 Imaging Display Items Item Description Freeze control Record clip (video) Modes selection System Overview Butterfly iQ Vet™ User Manual...
Page 27: Presets
Several presets include a Midline tool which you can access using the Tools icon. For more information, see “Reviewing Frames From a Frozen Image” on page 5-6. For details on configuring the Preset settings, see “Configuring Preset Settings” on page 4-5. System Overview Butterfly iQ Vet™ User Manual...
Page 28 Presets System Overview 3-10 Butterfly iQ Vet™ User Manual...
Page 29: Chapter 4: Setting Up The System
– To decline push notification, tap Don’t notify me. Note — You can also configure Notifications in your device’s Settings. 5. Connect the Butterfly iQ Vet™ probe to your mobile device. Setting Up the System Butterfly iQ Vet™ User Manual...
Page 30: Updating Firmware
The Master the Butterfly iQ™ videos are displayed upon first login. For details on accessing the videos at anytime, see “Accessing Help” on page 4-5. 7. Begin performing an ultrasound study. 8. When your study is complete, unplug the Butterfly iQ Vet™ probe from your mobile device. Updating Firmware The firmware on your mobile device must be up-to-date to perform imaging.
Page 31: Navigating The App
1. From the imaging screen, tap your user avatar (or your initials) in the upper left corner. 2. Tap to display the Settings screen. 3. Tap My Account. 4. Tap Log Out. Setting Up the System Butterfly iQ Vet™ User Manual...
Page 32: Forgotten Password
Use the Help section to access Help settings. For more information, see “Accessing Help” on page 4-5. • Use the About section to view your version of the Butterfly iQ™ App. Setting Up the System Butterfly iQ Vet™ User Manual...
Page 33: Configuring Preset Settings
Use the Privacy Policy section to view Butterfly Network Inc.’s Privacy Policy. • Use the Terms of Use section to view Butterfly Network Inc.’s Terms of Use. • Use the End User License Agreement section to view Butterfly Network Inc.’s End User License Agreement.
Page 34: Charging The Probe
WARNINGS! • Use only cables, probes, chargers, and accessories specified for use with Butterfly iQ Vet™. Substitution of non-approved accessories may cause the system to perform improperly or cause injury to the patient or operator. • If the probe seems unusually hot, produces an odor or smoke, or leaks, stop use immediately.
Page 35  To charge the probe: Note — The Butterfly iQ Vet™ uses a wireless charging system. Do not attempt to insert your probe’s cable into the charging pad. 1. Disconnect the probe from the mobile device. Setting Up the System Butterfly iQ Vet™...
Page 36 Since the system limits patient contact temperature and will not scan at or above 43°C (109°F), allowing the probe to cool down before use will optimize scan time performance. Setting Up the System Butterfly iQ Vet™ User Manual...
Page 37: Checking Battery Level
Keep the battery fully charged whenever possible. Note — You can view the battery indicator percentage by accessing the My iQ screen. For details, see “Configuring Your System Settings” on page 4-4. Setting Up the System Butterfly iQ Vet™ User Manual...
Page 38 Charging the Probe Setting Up the System 4-10 Butterfly iQ Vet™ User Manual...
Page 39: Chapter 5: Using The System
This chapter provides information and instructions for using Butterfly iQ Vet™ to begin and end studies. It also provides information and instructions for freezing and unfreezing during live imaging, and for performing measurements. WARNING! It is unsafe to start using the Butterfly iQ Vet™ before reading this manual in its entirety. Notes: •...
Page 40: Entering Patient Data
Capturing and Recording Images Note — This feature is only available when archiving to the Butterfly Cloud destination. This section provides information and instructions for using various features to capture and record images. Using the System Butterfly iQ Vet™ User Manual...
Page 41: Capturing Images
This section provides information and instructions for adjusting the gain, depth, and TGC, using pan and zoom, freezing and unfreezing an image, and using the midline. Adjusting the Gain, Depth, and TGC The Gain, Depth, and TGC controls are available during live imaging. Using the System Butterfly iQ Vet™ User Manual...
Page 42 2. When the Gain control is visible, slide your finger right or left to increase or decrease the gain. 3. When done, tap anywhere outside of the Gain control or simply wait until the control is no longer active. Using the System Butterfly iQ Vet™ User Manual...
Page 43: Using Pan And Zoom
1. Place two fingers on the screen and spread them in to zoom out or double-tap the zoomed image. 2. Continue using the pinch to zoom or double-tap gestures to zoom in and out on the image. Using the System Butterfly iQ Vet™ User Manual...
Page 44: Freezing And Unfreezing An Image
Perform Line and Ellipse measurements. For more details, see “Performing a Linear Measurement” on page 6-1. To capture a cine, tap Capture Cine. The cine is automatically saved to the Capture Reel. Using the System Butterfly iQ Vet™ User Manual...
Page 45: Using The Midline
To access the Midline tool from within the preset: 1. Tap or swipe the Tools icon , located at the bottom right corner. 2. Tap to turn the midline markers on. 3. Tap to turn the midline markers off. Using the System Butterfly iQ Vet™ User Manual...
Page 46: Saving A Study - Uploading To The Butterfly Cloud
3. To delete all of the items from the Capture Reel, tap Clear images. The system prompts you to confirm the deletion. Clearing the series removes all of the images and clips from the Capture Reel. Using the System Butterfly iQ Vet™ User Manual...
Page 47: Chapter 6: Annotations
6. To edit a line, tap the line or tap the line’s measurement and adjust the line as needed. 7. To delete a line, tap the line or tap the line’s measurement. Tap the X next to the corresponding numeric measurement display, and then tap Delete Line to confirm. Annotations Butterfly iQ Vet™ User Manual...
Page 48: Performing An Ellipse Measurement
5. To enter your own annotation, use the keyboard to type the annotation. 6. Tap Done. 7. Drag the annotation to the desired location on the image. 8. To delete an annotation, tap it and then select its X. Tap Delete Annotation to confirm. Annotations Butterfly iQ Vet™ User Manual...
Page 49: Chapter 7: Using Color Doppler
You can zoom in on the ROI. As you adjust the zoom, a thumbnail of the image is displayed in the upper right portion of the screen with a yellow ROI box. As you pan the zoomed image, the ROI is updated to orient you to the zoomed image. Using Color Doppler Butterfly iQ Vet™ User Manual...
Page 50: Adjusting The Gain, Depth, And Prf
ROI. For details on adjusting gain and depth, see “Adjusting the Gain, Depth, and TGC” on page 5-3. To adjust the color flow state, choose Low or High. Using Color Doppler Butterfly iQ Vet™ User Manual...
Page 51: Chapter 8: Using M-Mode Display
Adjust the Depth and Gain • Perform time, distance, and heart rate measurements on the display  To use M-mode: To adjust the scan line angle, tap the move point and drag it radially. Using M-mode Display Butterfly iQ Vet™ User Manual...
Page 52: Adjusting The Sweep Speed, Gain, And Depth
3. To perform a distance measurement, tap 4. Use the to position the cross-hairs. 5. To delete the line, tap the X next to the corresponding numeric measurement display, and then tap Delete Line to confirm. Using M-mode Display Butterfly iQ Vet™ User Manual...
Page 53: Chapter 9: Uploading A Study
6. Tap Confirm. The imaging screen is displayed. A progress indicator is displayed around your avatar in the upper left corner of the screen. Once uploaded, a check mark is displayed to confirm that the study is uploaded to the selected archive. Uploading a Study Butterfly iQ Vet™ User Manual...
Page 54: Viewing Upload Progress
8. Tap Share De-identified Study Link and then paste the link in the application you use to share information (such as email, text message, and so on). Uploading a Study Butterfly iQ Vet™ User Manual...
Page 55: Adding And Viewing Comments On Images
1. Perform the steps to retrieve a study. For details, see “Viewing an Uploaded Study” on page 9-2. 2. Select the study. 3. Tap Delete Study to delete the study. A prompt is displayed prompting you to confirm the deletion. 4. Tap Delete Study. Uploading a Study Butterfly iQ Vet™ User Manual...
Page 56 Viewing an Uploaded Study Uploading a Study Butterfly iQ Vet™ User Manual...
Page 57: Chapter 10: Using The Butterfly Cloud
Butterfly iQ™ App. Users have the ability to access ultrasound exams uploaded to the Butterfly Cloud through the Butterfly iQ™ App. Depending on your privileges, you may be able to access an entire organization’s Butterfly iQ Vet™ exams uploaded to the Butterfly Cloud.
Page 58: Accessing The Butterfly Cloud
Click your username in the top right corner and select Log out. Overview of Main Screen The main screen is comprised of the following sections: • “Settings” on page 10-3 • “Archives” on page 10-5 • “Studies” on page 10-7 Using the Butterfly Cloud 10-2 Butterfly iQ Vet™ User Manual...
Page 59: Settings
To receive email notifications, click the Email Notifications check box. If unchecked, you will not receive email notifications. • To receive mobile notifications, click the Mobile Notifications check box. If unchecked, you will not receive mobile notifications. Using the Butterfly Cloud Butterfly iQ Vet™ User Manual 10-3...
Page 60: Viewing Organization Settings
Members list as Pending Invitation until the member accepts the invitation. Changing a Member’s Access Level Note — You must have Admin privileges to change a member’s access level. Using the Butterfly Cloud 10-4 Butterfly iQ Vet™ User Manual...
Page 61: Archives
The archive opens in the center of the screen with information about the archive including the archive name, the study or studies listed within the archive, and the date of each study. Using the Butterfly Cloud Butterfly iQ Vet™ User Manual 10-5...
Page 62: Deleting An Archive
3. Select Restore at the center of the screen. The system prompts you to confirm the restoration of the deleted archive. 4. Click Restore to restore the deleted archive. Using the Butterfly Cloud 10-6 Butterfly iQ Vet™ User Manual...
Page 63: Studies
As you type, a drop-down menu displays matching results. You can add additional information about the study to narrow the results. The results are listed in the center of the screen. Using the Butterfly Cloud Butterfly iQ Vet™ User Manual 10-7...
Page 64: Editing Study Details
Click the copy control. The link is copied to your device's clipboard. 4. Navigate to where you want to share the link (email, text message, document, and so paste the link. on), and Using the Butterfly Cloud 10-8 Butterfly iQ Vet™ User Manual...
Page 65: Moving A Study Across Archives
2. In the right corner of the study, click the drop-down menu icon to display the menu. 3. Select Delete study. The system prompts you to confirm the deletion. 4. Click Delete to delete the study. Using the Butterfly Cloud Butterfly iQ Vet™ User Manual 10-9...
Page 66: Restoring A Deleted Study
All members who have access to the study can view the comments. Use the commenting feature to tag other users to take a closer look at an image or clip, and to receive feedback. Using the Butterfly Cloud 10-10 Butterfly iQ Vet™ User Manual...
Page 67: Viewing Images And Clips
For details on configuring notification settings, see “Configuring Your System Settings” on page 4-4. For additional information on the types of notifications in the Notification Center, please visit the knowledge base at support.butterflynetwork.com. Using the Butterfly Cloud Butterfly iQ Vet™ User Manual 10-11...
Page 68 Notification Center Using the Butterfly Cloud 10-12 Butterfly iQ Vet™ User Manual...
Page 69: Chapter 11: Maintenance
Carefully handling the probe to prevent damaging the equipment. Do not expose internal electronics temperature to temperatures exceeding 70 C. Note — For information on environmental operating conditions, including brief storage temperature conditions, see Table 14-4. Maintenance Butterfly iQ Vet™ User Manual 11-1...
Page 70: Cleaning And Disinfecting The Probe
Figure 11-1 Wrapping the Cable Cleaning and Disinfecting the Probe This section provides information and instructions for properly cleaning and disinfecting the Butterfly iQ Vet™ probe. Following these instructions will also help to avoid damaging the probe during cleaning and disinfection. CAUTION! Only clean the probe with approved cleaning products and wipes.
Page 71 6. Visually inspect the probe in a well-lit area to ensure all surfaces are clean. If the probe is not clean, repeat the cleaning steps above. 7. Dispose of cleaning material in accordance with all applicable regulations. Maintenance Butterfly iQ Vet™ User Manual 11-3...
Page 72: Disinfecting The Probe
Updates to the Butterfly iQ™ App and probe are handled through the Apple App Store. Keep your mobile device’s operating system and the Butterfly iQ™ App updated to ensure you have the most up-to-date version. Maintenance 11-4 Butterfly iQ Vet™ User Manual...
Page 73: Performing The Probe Diagnostic Test
Perform the diagnostic test periodically. With normal use, monthly testing is best practice. The diagnostic test is only for the Butterfly iQ Vet™ ultrasound probe. The App does not have the ability to assess the mobile device’s screen integrity. Butterfly does not require testing with a phantom and does not require mobile devices to be tested.
Page 74 Performing the Probe Diagnostic Test Maintenance 11-6 Butterfly iQ Vet™ User Manual...
Page 75: Chapter 12: Troubleshooting
Make sure you are using enough approved ultrasound gel. If quality does not improve, contact Support. Blank screen or screen no Close the App and restart the App. longer updates Unplug the probe from the mobile platform (mobile device) and reconnect. Troubleshooting Butterfly iQ Vet™ User Manual 12-1...
Page 76 This indicates that your mobile device does not have a passcode. Butterfly in: Device Passcode iQ Vet™ requires the mobile device to have a passcode for patient data Required security. Tap Open Settings to enable and configure the passcode for your mobile device.
Page 77 43°C (109°F). The system provides this alert prior to shutting off. Scanning can continue during this message until the probe reaches the auto-cool initi- ation. Auto-cool is triggered to ensure patient safety. Scanning will resume after the auto-cool has reduced the probe temperature. Troubleshooting Butterfly iQ Vet™ User Manual 12-3...
Page 78 Troubleshooting Troubleshooting 12-4 Butterfly iQ Vet™ User Manual...
Page 79: Chapter 13: Getting Support
Butterfly Support will respond to your request via email. Contacting Butterfly Support Butterfly Network, Inc. 530 Old Whitfield Street Guilford, CT 06437 USA Telephone: +1(855) 296-6188 FAX: +1 (203) 458-2514 General inquiries: info@butterflynetwork.com Support and service: support@butterflynetwork.com Website: www.butterflynetwork.com Getting Support Butterfly iQ Vet™ User Manual 13-1...
Page 80 Contacting Butterfly Support Getting Support 13-2 Butterfly iQ Vet™ User Manual...
Page 81: Chapter 14: Specifications
Using the Butterfly iQ™ App on a mobile device that does not meet the minimum requirements may affect performance and image quality, possibly resulting in misdiagnosis. Note — The Butterfly iQ™ App does not affect the mobile device’s operating system settings. Specifications Butterfly iQ Vet™ User Manual 14-1...
Page 82: System Specifications
The user interface and accompanying documentation is in English only. Display Variable Min/Max scan depth 2 cm min / 30 cm max Ultrasound chip Integrated CMOS chip Transducers 9000-element CMUT Frequency Range 1-10 MHz Specifications 14-2 Butterfly iQ Vet™ User Manual...
Page 83: Probe Battery Charger
Wireless Charging Power Wireless Charging Efficiency > 73% Protection Over voltage protection, Over current protection Dimensions 121 x 62 x 11mm 121 x 62 x 19mm 121 x 62 x 19mm Color Black/Blue Black Black Specifications Butterfly iQ Vet™ User Manual 14-3...
Page 84: Recommended Ultrasound Gels
LiquaSonic Ultrasound Gel by Medline Industries  • SCAN Ultrasound Gel by Parker  • STERILE Aquasonic 100 Ultrasound Transmission Gel by Parker CAUTION! Use only approved gels or liquids. Non-approved gels and liquids may damage the probe. Specifications 14-4 Butterfly iQ Vet™ User Manual...
Page 85: Environmental Operating Conditions
The Butterfly iQ Vet™ has been designed for use within electromagnetic environments specified in Table 14-5 and Table 14-6. To avoid radiated and conducted electromagnetic disturbances, the customer or the user of the Butterfly iQ Vet™ should assure that it is used within these stated specifications.
Page 86 Compliance Electromagnetic environment - guidance RF emission CISPR11 Group 1 The Butterfly iQ Vet™ Ultrasound System uses RF energy only for its internal function. 11EN55011 Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment.
Page 87: Separation Distances
RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Butterfly iQ Vet™ Ultrasound System is used exceeds the applicable RF compliance level above, the Butterfly iQ Vet™ Ultrasound System should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the Butterfly iQ Vet™...
Page 88 NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. Specifications 14-8 Butterfly iQ Vet™ User Manual...
Page 89: Acoustic Output
Trained professionals should perform diagnostic ultrasound procedures safely for the intended purpose. Butterfly iQ Vet™ and its thermal (TI) and mechanical (MI) safety limits are set to industry standards, as a Track 3 device, and are displayed on the display screen. The TI is displayed as either soft tissue (TIS), bone (TIB) or cranial bone (TIC), and, only one of these indices is displayed at any given time, based on the clinical setting default of a selected exam.
Page 90: Symbols Used
Acoustic Output Track 3 Specific Information The Butterfly iQ Vet™ adheres to conformance with FDA Track 3 output settings, output display and ALARA safety principles. In support of Track 3 acoustic output, the following tables provide the global maximum acoustic output indices for the probe and each of its clinical output modes.
Page 91 Methodology for Mechanical and Thermal Indices". The focal length, or azimuthal (x) and elevational (y) lengths, if different (centimeters). The derated pulse-average intensity at the point of global maximum PA.3 reported MI (watts per square centimeter). Specifications Butterfly iQ Vet™ User Manual 14-11...
Page 92 Information need not be provided for any formulation of TIS not yielding the maximum value of TIS for that mode. Note 2: Information need not be provided regarding TIC for any TRANSDUCER ASSEMBLY not intended for transcranial or neonatal cephalic uses. Specifications 14-12 Butterfly iQ Vet™ User Manual...
Page 93 Maximum Index Value 0.13 0.29 0.718 Pr.3 (MPa) (mW) 17.4 (mW) 0.74 min of TA.3 (cm) (cm) 2.76 5.83 (cm) (cm) 1.84 2.19 (MHz) 2.49 2.49 X (cm) Dim of A aprt Y (cm) Specifications Butterfly iQ Vet™ User Manual 14-13...
Page 94 Information on MI and TI need not be provided if the equipment meets both the exemption clauses given in 51.2aa) and 51.2 dd). Intended use does not include cephalic so TIC is not computed. Specifications 14-14 Butterfly iQ Vet™ User Manual...
Page 95 Information need not be provided regarding TIC for any TRANSDUCER ASSEMBLY not intended for transcranial or neonatal cephalic uses. Note 3: Information on MI and TI need not be provided if the equipment meets both the exemption clauses given in 51.2aa) and 51.2 dd). Specifications Butterfly iQ Vet™ User Manual 14-15...
Page 96: Measurement Accuracy
≤1 cm >1 cm aprt aprt Intended use does not include cephalic so TIC is not computed. Measurement Accuracy The Butterfly iQ Vet™ device has been designed to perform the following clinical measurements: M-mode ± • Distance measurements accurate to within 3% of the displayed value.
Page 97: Recycling And Disposal
Recycling and Disposal Recycling and Disposal Recycle the Butterfly iQ Vet™’s probe and accessories at the end of their useful life and in accordance with local, state, provincial, and/or national regulations. Prior to recycling, items should be clean and contaminant free.
Page 98 Waste Electrical and Electronic Equipment Specifications 14-18 Butterfly iQ Vet™ User Manual...
Page 99: Chapter 15: Symbols
Table 15-1 lists and describes a set of symbols for medical electronic equipment that classify a connection or warn of potential hazards. The symbols listed in Table 15-1 may be used on the Butterfly iQ Vet™, and on its accessories and packaging. Table 15-1 Symbols...
Page 100 Indicates that the USA federal law restricts this device to sale by or on the order of a physician. Indicates the serial number of the device. Indicates to keep the device away from sunlight or heat. Symbols 15-2 Butterfly iQ Vet™ User Manual...
Page 101 Indicates this side up. Indicates that the device must be collected separately for disposal. Follow proper disposal procedures. Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA) Symbols Butterfly iQ Vet™ User Manual 15-3...
Page 102: Notes
Notes Notes Symbols 15-4 Butterfly iQ Vet™ User Manual...
Page 103 Butterfly Cloud account settings, 10-3 B-mode, measurement accuracy, 14-16 preset settings, 4-5 Butterfly Cloud, 9-1 system settings, 4-4 accessing, 10-2 Connecting probe, 4-1 adding a new member, 10-4 Contraindications for use, 1-2 changing member’s access level, 10-5 Index-1 Butterfly iQ Vet™ User Manual...
Page 104 Butterfly Cloud, 10-8 Outbox, 9-2 viewing and adding comments, 9-3 viewing in Butterfly Cloud, 10-11 Imaging display, 3-6 Panning, 5-5 Indications for use, 1-2 Password, forgotten, 4-4 Installing App, 4-1 Patient data Index-2 Butterfly iQ Vet™ User Manual...
Page 105 Terms of Use, 4-5 Reviewing frames from a frozen image, 5-6 Testing, performing Probe Diagnostic test, 11-5 ROI, 5-5 TGC, adjusting during live imaging, 5-5 Touchscreen, 4-3 Training, 1-2 Safety Transporting the probe, 11-1 Biological, 2-6 Index-3 Butterfly iQ Vet™ User Manual...
Page 106 Updates, managing APP, 4-2 Updating App, 11-4 Upload Studies Over Cellular, 4-4 Uploading Butterfly Cloud, 9-1 viewing progress, 9-2 User Manual, 4-5 Viewing an uploaded study, 9-2 Viewing archive upload process, 9-2 Wireless connectivity, 3-2 Zooming, 5-5 Index-4 Butterfly iQ Vet™ User Manual...

Butterfly Network iQ Vet User Manual

Chapter 1: Introduction

Chapter 2: Safety Information

Chapter 3: System Overview

Chapter 4: Setting up the System

Chapter 5: Using the System

Chapter 6: Annotations

Chapter 7: Using Color Doppler

Chapter 8: Using M-Mode Display

Chapter 9: Uploading a Study

Chapter 10: Using the Butterfly Cloud

Chapter 11: Maintenance

Chapter 12: Troubleshooting

Chapter 13: Getting Support

Chapter 14: Specifications

Chapter 15: Symbols

Quick Links

Summary of Contents for Butterfly Network iQ Vet

This manual is also suitable for:

Table of Contents