Table of Contents
Advertisement
Quick Links
KNX Touch One Style
Technical specifications and installation instructions
Item number 70197
EN
Elsner Elektronik GmbH Control and Automation Engineering
Sohlengrund 16
75395 Ostelsheim
Germany
Phone +49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de
Fax
+49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de
Technical support: +49 (0) 70 33 / 30 945-250
Advertisement
Table of Contents
Summary of Contents for elsner elektronik KNX Touch One Style
- Page 1 KNX Touch One Style Technical specifications and installation instructions Item number 70197 Elsner Elektronik GmbH Control and Automation Engineering Sohlengrund 16 75395 Ostelsheim Phone +49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de Germany +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de...
- Page 2 Accessories (not included in the scope of delivery): • Radio remote control Remo 8 1.2. Technical Data Housing Glass, plastic Colour White/grey Assembly Flush/cavity wall Protection Class IP 20 Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
- Page 3 Please also take note that the displayed temperature value will be too high temporarily after a power breakdown. The product conforms with the provisions of EU directives. Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
- Page 4 Draft from ducts which lead from other rooms to the concealed box • Warming or cooling of the building structure on which the device is mounted, e.g. due to sunlight, heating or cold water pipes Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
- Page 5 Place the concealed box in the wall so that the arrows point upwards. 2.3.1. Wall-fitting For fitting, screw the cover (board) on to the concealed box with the en- closed screws. Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
- Page 6 Connect the cables to the display and place the display unit on the concealed box. The magnets must be attracted by the mounting screws considerably and the display unit must rest tightly on the concealed box. Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
- Page 7 The Physical Address menu displays the current address and the status of the pro- gramming LED (the address is 15.15.250 on delivery). Press the Programming button, in order to address the device to the bus. Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
- Page 8 If there is a power outage, the data you have entered will be saved for around 10 years. No battery is required for this. Room Controller KNX Touch One Style • Status: 06.03.2017 • Errors excepted. Subject to technical changes...
Need help?
Do you have a question about the KNX Touch One Style and is the answer not in the manual?
Questions and answers