Emerald Planet EP-SA-Li10 User Manual

Advertisement

SMOKE ALARM
USER MANUAL
MODEL NUMBER: EP-SA-Li10
Thank you for choosing this smoke alarm.
Please take a few minutes to read the user's
manual thoroughly and familiarise yourself and
your family with its operation, and save it for
future reference.
POWER:
built-in DC3V(CR123A) Lithium battery (battery not replaceable)
BATTERY LIFETIME:
10 years
OPERATION CURRENT:
<8uA (standby), <70mA (alarm)
ALARM VOLUME:
>85dB(A) at 3 meters
ALARM SENSITIVITY:
0.1-0.17dB/m
SILENCE TIME:
approx. 10 minutes
SOUND PATTERN:
ISO8201(BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s – BI 0.5s – pause 1.5s,
with the red LED flash, repeat this alarm
DESCRIPTION
This unit uses a photoelectric smoke detection
chamber. Photoelectric technology is more
sensitive to detecting slow smoldering fires which
generate thick, black smoke, a little heat and may
smolder for hours before bursting into flames.
Unlike previous ionizing alarms, this smoke alarm
does not contain radioactive material and is
harmless to the environment.
Emerald Planet recommends that smoke alarms
be installed in every room (except bathrooms
and kitchens), and every other area of the home,
making sure all people in the home will be able to
hear and respond to the alarm when activated.
Each state of Australia has its own legislation
regarding smoke alarm requirements. Please refer
to the following websites to check your states
current installation requirements.
EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000
This unit has been designed to meet the latest
safety standards demanded in Australia and
complies with the requirements of AS3786:2014.
NSW
fire.nsw.gov.au/page.php?id=80
QLD
www.qfes.qld.gov.au/community-safety/smokealarms
SA
mfs.sa.gov.au/site/community_safety/home_fire_and_life_
safety_information_sheets_domestic/smoke_alarms_what_
you_need_to_know.jsp
WA
dfes.wa.gov.au/safetyinformation/fire/fireinthehome/
FireintheHomeManualsGuidelines/DFES_FireintheHome-
SmokeAlarm-Legislative-Requirements-LAWS.pdf
TAS
tfseducation.com.au/resources/publications
ACT
esa.act.gov.au/community-information/home-fire-safety/
smoke-alarms/
NT
https://nt.gov.au/emergency/community-safety/
fire-safety-at-home/smoke-alarms

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EP-SA-Li10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Emerald Planet EP-SA-Li10

  • Page 1 Please refer smoke-alarms/ to the following websites to check your states current installation requirements. https://nt.gov.au/emergency/community-safety/ fire-safety-at-home/smoke-alarms EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000...
  • Page 2: Operation

    CAUTION: BEFORE SILENCING THE ALARM IDENTIFY THE SOURCE OF SMOKE AND ENSURE THERE IS NO RISK OF FIRE. EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000...
  • Page 3: Maintenance And Cleaning

    Test button rapidly for at least 6 times within 5 seconds during the time that the LED flashes rapidly, until the unit generates EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000...
  • Page 4 DIAGRAM 6 PEAK CEILING PLACEMENT SLOPED CEILING PLACEMENT Smoke alarm should be located between 500mm and 1500mm from the highest point. EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000...
  • Page 5: Installation

    2. Clean smoke alarm. Refer to “Maintenance & Cleaning” section. when someone is showering etc.) 3. Move smoke alarm to new location if necessary and press the “Test” button. EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000...
  • Page 6 EMERALD PLANET HEAD OFFICE - SYDNEY Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia P 02 9466 6000...

Table of Contents