Charging The Battery - TechniSat TechniPlayer 8 User Manual

If the battery charge state is no longer sufficient for operation, the empty
battery symbol appears or the device switches itself off. Please recharge
the battery at this time.
> To do this, connect the device to the power supply unit via the USB
jack and connect this to the main power supply. The battery is
automatically charged.
The device is automatically switched on when charging.
The charging procedure is indicated by the charging symbol
the display.
Additional information: If the device is connected to the PC via a USB
cable, the battery charges automatically.
Note
• Please only use the supplied charger to charge the battery.
• To enjoy the full capacity of the battery, it should be charged for 12 hours
the first time it is charged.
• Later, a full charge will take approximately 5 hours.

Charging the battery

9
on